Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

REFRIGERANT PRESSURE SENSOR INSPECTION [MANUAL AIR CONDITIONER (US)]

REFRIGERANT PRESSURE SENSOR INSPECTION [MANUAL AIR CONDITIONER (US)]

SM2566296


id0740a28174y3

am3zzw00030468



SKYACTIV-G 2.0, SKYACTIV-G 2.5 (Refrigerant pressure sensor No.1)

1.Install the manifold gauge. (See MANIFOLD GAUGE SET CONNECTION.)

2.Verify the high-pressure side reading of the manifold gauge.

3.Measure the terminal voltage at PCM terminal 2AZ, 2AV and 2AI.

4.Using the graph below, measure and verify the terminal voltages at 2AV.

5.Follow the PCM inspection when measuring the other terminal voltages. (See PCM INSPECTION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].) (See PCM INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)

• Terminal 2AZ: Approx. 5 V (Ignition switch ON)
• Terminal 2AI: 1.0 V or less
― If each voltage is not normal, inspect the related wiring harness.
• If there is any malfunction, replace the related wiring harness.
• If the wiring harness is normal, replace the refrigerant pressure sensor.
am3zzw00022978



SKYACTIV-G 2.0, SKYACTIV-G 2.5 (Refrigerant pressure sensor No.2)

1.Install the manifold gauge. (See MANIFOLD GAUGE SET CONNECTION.)

2.Verify the high-pressure side reading of the manifold gauge.

3.Measure the terminal voltage at PCM terminal 1D, 1AU and 1BH.

4.Using the graph below, measure and verify the terminal voltages at 1AU.

5.Follow the PCM inspection when measuring the other terminal voltages. (See PCM INSPECTION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].)(See PCM INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)

• Terminal 1D: Approx. 5 V (Ignition switch ON)
• Terminal 1BH: 1.0 V or less
― If each voltage is not normal, inspect the related wiring harness.
• If there is any malfunction, replace the related wiring harness.
• If the wiring harness is normal, replace the refrigerant pressure sensor.
am3zzw00027968