TRANSAXLE OVERHEATS [ET6A-EL (US)]
TRANSAXLE OVERHEATS [ET6A-EL (US)]
SM2566145
id0503n21026n5
|
Troubleshooting item |
Transaxle overheats |
|---|---|
|
Description
|
• Burnt smell emitted from the transaxle.
• Smoke is emitted from the transaxle.
|
|
Possible cause
|
1. Signal malfunction
2. ATF malfunction
3. Oil cooler malfunction
4. Control valve body malfunction
|
|
System wiring diagram
|
• Not applicable
|
|
Connector diagram
|
• Not applicable
|
Diagnostic procedure
|
Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
INSPECT SIGNAL PARTS FOR MALFUNCTION
• Inspect the value at the following PCM PIDs using the M-MDS. (See PID/DATA MONITOR INSPECTION.)
• Is there any malfunction? (See PID/DATA MONITOR TABLE [PCM (SKYACTIV-G (US))].)
|
Yes
|
Repair or replace any malfunctioning parts according to the inspection result.
|
|
No
|
Go to the next step.
|
||
|
2
|
INSPECT SIGNAL PARTS FOR MALFUNCTION
• Inspect the value at the following ESU PIDs using the M-MDS. (See PID/DATA MONITOR INSPECTION.)
• Is there any malfunction? (See PID/DATA MONITOR TABLE [ELECTRICAL SUPPLY UNIT (ESU) (US)].)
|
Yes
|
Repair or replace any malfunctioning parts according to the inspection result.
|
|
No
|
Go to the next step.
|
||
|
3
|
INSPECT ATF LEVEL
• Inspect the ATF level. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [ET6A-EL (US)].)
• Is there any malfunction?
|
Yes
|
Adjust the ATF level to the specification.
|
|
No
|
Go to the next step.
|
||
|
4
|
VISUALLY INSPECT OIL COOLER
• Visually inspect the oil cooler.
• Is there any malfunction?
|
Yes
|
Repair or replace any malfunctioning parts according to the inspection result.
|
|
No
|
Go to the next step.
|
||
|
5
|
VERIFY IF MALFUNCTION CAUSE IS CONTROL VALVE BODY
• Inspect the value at the following TCM PIDs using the M-MDS. (See PID/DATA MONITOR INSPECTION.)
• Is there any malfunction? (See PID/DATA MONITOR TABLE [TCM (ET6A-EL) (US)].)
|
Yes
|
Replace the control valve body.
|
|
No
|
Symptom troubleshooting is completed.
|