id091800811600

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the side turn light. (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)

3.Apply battery voltage to side turn light terminal A, and connect terminal B to ground.

am3zzw00026042

4.Verify that the LED illuminates.

• If the LED illuminates, go to the next step.

• If the LED does not illuminate, replace the side turn light. (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)

5.Remove the power outer mirror connector. (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)

6.Verify that the continuity between side turn light terminal and power outer mirror terminal is as indicated in the table.

am3zzw00026310

am6zzw00008097

• If not as indicated in the table, replace the power outer mirror. (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)