SEAT BACK COMPONENT REMOVAL/INSTALLATION
2016 – MX-5 – Body and Accessories
SEAT BACK COMPONENT REMOVAL/INSTALLATION
WARNING:
-
Handling a seat equipped with a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the Workshop Manual before handling the seat (side air bag integrated). (See AIR BAG SYSTEM SERVICE WARNINGS [STANDARD DEPLOYMENT CONTROL SYSTEM].) (See AIR BAG SYSTEM SERVICE CAUTIONS [STANDARD DEPLOYMENT CONTROL SYSTEM].) (See AIR BAG SYSTEM SERVICE WARNINGS [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) (See AIR BAG SYSTEM SERVICE CAUTIONS [TWO-STEP DEPLOYMENT CONTROL SYSTEM].)
1. Disconnect the negative battery cable and wait for 1 min or more.(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the following parts:
a. Seat (See SEAT REMOVAL/INSTALLATION.)
b. Seat side cover(See SEAT SIDE COVER REMOVAL/INSTALLATION.)
c. Buckle(See BUCKLE REMOVAL/INSTALLATION.)
3. Disconnect the connectors.
4. Pull out the wiring harness clip.
5. Remove the bolts.
6. Remove the seat back component.
7. Install in the reverse order of removal.