CONDENSER REMOVAL/INSTALLATION
< Previous Next >
2016 – MX-5 – Body and Accessories
CONDENSER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the wind blocker. (See WIND BLOCKER REMOVAL/INSTALLATION.)
3. Partially peel back the side shelf (LH) and rear package trim to a position where the condenser is visible. (See SIDE SHELF REMOVAL/INSTALLATION.) (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
4. Disconnect the connector.
5. Remove the bolt.
6. Remove the condenser.
7. Install in the reverse order of removal.
© 2014 Mazda North American Operations, U.S.A.