2016 – MX-5 – Body and Accessories

HOOD LATCH SWITCH INSPECTION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the front bumper. (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)

3. Disconnect the hood latch switch connector. (See HOOD LATCH REMOVAL/INSTALLATION.)

4. Verify that the continuity is as indicated in the table.

NOTE:

• Inspect the continuity when the hood is open and closed.

• If the operation as indicated in the table cannot be verified, replace the hood latch. (See HOOD LATCH REMOVAL/INSTALLATION.)

< Previous Next >