2016 – MX-5 – Body and Accessories

AIR SEAL COWL UP REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Front bumper (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)

b. Front bumper slider (See FRONT BUMPER SLIDER REMOVAL/INSTALLATION.)

c. Front combination light (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

d. Crash zone sensor (See CRASH ZONE SENSOR REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) (See CRASH ZONE SENSOR REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)

e. Front bumper reinforcement (See FRONT BUMPER REINFORCEMENT REMOVAL/INSTALLATION.)

3. Disconnect the connector.

4. Remove the wiring harness clips.

5. Remove the screws.

6. Remove the air seal cowl up.

7. Install in the reverse order of removal.

< Previous Next >