{"id":9977,"date":"2022-03-10T20:30:52","date_gmt":"2022-03-10T20:30:52","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2565531\/"},"modified":"2022-03-10T20:30:52","modified_gmt":"2022-03-10T20:30:52","slug":"sm2565531","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2565531\/","title":{"rendered":"DTC U2300:00 [PCM (SKYACTIV-G (US))]"},"content":{"rendered":"
\n

DTC U2300:00 [PCM (SKYACTIV-G (US))]<\/h3>\n<\/div>\n

SM2565531<\/p>\n

<\/p>\n
\n
\n
\n

id0102t42283u0<\/p>\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 To determine the malfunctioning part, proceed with the diagnostics from “Function Inspection Using M-MDS”.<\/div>\n<\/dd>\n<\/dl>\n



\n<\/a><\/p>\n

Details On DTCs<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Description<\/p>\n<\/th>\n

\n

Global central configuration error<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
Detection condition<\/span><\/div>\n<\/td>\n
\n
Determination conditions<\/div>\n<\/td>\n
\n
\u2022 Any of following conditions occurs:<\/div>\n
\n
\n
\u2015 No configuration of the body control module (BCM).<\/div>\n
\u2015 The configuration signal with the estimated CAN ID is not sent from the body control module (BCM).<\/div>\n
\u2015 The configuration signal value sent via CAN from the body control module (BCM) is unknown or invalid.<\/div>\n
\u2015 The configuration signal value sent via CAN from the body control module (BCM) is a value other than the estimated value.<\/div>\n
\u2015 The configuration signal value sent via CAN from the body control module (BCM) does not match the PCM value.<\/div>\n<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
\n
Preconditions<\/div>\n<\/td>\n
\n
\u2022 Battery voltage: above 9.45 V<\/span> *1<\/sup><\/div>\n
\u2022 Switch the ignition ON (engine off or on)<\/div>\n
*1<\/sup>: Standard can be verified by displaying PIDs using M-MDS<\/div>\n<\/td>\n<\/tr>\n
\n
Malfunction determination period<\/div>\n<\/td>\n
\n
\u2022 10 s<\/span> period<\/div>\n<\/td>\n<\/tr>\n
\n
Drive cycle<\/div>\n<\/td>\n
\n
\u2022 1<\/div>\n<\/td>\n<\/tr>\n
\n
Self test type<\/div>\n<\/td>\n
\n
\u2022 CMDTC self test, KOEO self test, KOER self test<\/div>\n<\/td>\n<\/tr>\n
\n
Sensor used<\/div>\n<\/td>\n
\n
\u2022 PCM<\/div>\n<\/td>\n<\/tr>\n
\n
Fail-safe function<\/span><\/div>\n<\/td>\n
\n
\u2022 Operates by the previously learned configuration value.<\/div>\n<\/td>\n<\/tr>\n
\n
Vehicle status when DTCs are output<\/span><\/div>\n<\/td>\n
\n
\u2022 Not applicable<\/div>\n<\/td>\n<\/tr>\n
\n
Possible cause<\/span><\/div>\n<\/td>\n
\n
\u2022 CAN drive error (body control module (BCM) or PCM)<\/div>\n
\u2022 Configuration data for the body control module (BCM) is incorrectly set<\/div>\n
\u2022 CAN communication line malfunction between body control module (BCM) and PCM<\/div>\n
\u2022 Body control module (BCM) connector or terminals malfunction<\/div>\n
\u2022 PCM connector or terminals malfunction<\/div>\n
\u2022 Body control module (BCM) incorrect installation<\/div>\n
\u2022 Body control module (BCM) malfunction<\/div>\n
\u2022 Error in non-volatile memory in PCM<\/div>\n
\u2022 PCM malfunction<\/div>\n<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Function Explanation (DTC Detection Outline)<\/p>\n

\u2022 If the PCM detects an error in the signal received from the body control module (BCM), it determines a malfunction.<\/div>\n



\n<\/a><\/p>\n

Repeatability Verification Procedure<\/p>\n

1. Clear the DTC recorded in the memory. (See CLEARING DTC<\/a>.)<\/div>\n
2. Start the engine.<\/div>\n



\n<\/a><\/p>\n

PID Item\/Simulation Item Used In Diagnosis<\/p>\n

\u2022 Not applicable<\/div>\n



\n<\/a><\/p>\n

Function Inspection Using M-MDS<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n
\n

Step<\/p>\n<\/th>\n

\n

Inspection<\/p>\n<\/th>\n

\n

Results<\/p>\n<\/th>\n

\n

Action<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
1<\/div>\n<\/td>\n
\n
PURPOSE: VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY<\/div>\n
\u2022 Verify related Service Bulletins, on-line repair information, or Service Information availability.<\/div>\n
\u2022 Is any related Information available?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Perform repair or diagnosis according to the available information.<\/div>\n
\u2022 If the vehicle is not repaired, go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
2<\/div>\n<\/td>\n
\n
PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION<\/div>\n
\u2022 Record the freeze frame data\/snapshot data.<\/p>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 Recording can be facilitated using the screen capture function of the PC.<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
3<\/div>\n<\/td>\n
\n
PURPOSE: INSPECT FOR OTHER RELATED DTCs<\/div>\n
\u2022 Perform the DTC inspection for the PCM. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Are any of the following DTCs displayed?<\/div>\n
\n
\n
PCM:<\/div>\n<\/dd>\n
\n
\u2015 U0140:00<\/div>\n<\/dd>\n<\/dl>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Repair the malfunctioning location according to the applicable DTC troubleshooting.<\/div>\n
(See DTC U0140:00 [PCM (SKYACTIV-G (US))]<\/a>.)<\/div>\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
4<\/div>\n<\/td>\n
\n
PURPOSE: VERIFY BODY CONTROL MODULE (BCM) DTC<\/div>\n
\u2022 Perform the DTC inspection for the body control module (BCM). (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Are any DTCs displayed?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Repair the malfunctioning location according to the applicable DTC troubleshooting.<\/div>\n
(See DTC TABLE [BODY CONTROL MODULE (BCM) (US)]<\/a>.)<\/div>\n
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Troubleshooting Diagnostic Procedure<\/p>\n

Intention of troubleshooting procedure<\/div>\n
\u2022 Step 1\u20142<\/div>\n
\n
\n
\u2015 Perform an inspection of the body control module (BCM) and PCM-related connectors.<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Step 3<\/div>\n
\n
\n
\u2015 Verify the body control module (BCM) installation condition.<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Step 4<\/div>\n
\n
\n
\u2015 Perform a unit inspection of the body control module (BCM).<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Repair completion verification<\/div>\n
\n
\n
\u2015 Verify that the primary malfunction is resolved and there are no other malfunctions.<\/div>\n<\/dd>\n<\/dl>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Step<\/p>\n<\/th>\n

\n

Inspection<\/p>\n<\/th>\n

\n

Results<\/p>\n<\/th>\n

\n

Action<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
1<\/div>\n<\/td>\n
\n
PURPOSE: INSPECT BODY CONTROL MODULE (BCM) CONNECTOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable connector and terminal. (See CONNECTOR INSPECTION<\/a>.)<\/div>\n
\u2022 Are the connector and terminal normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
2<\/div>\n<\/td>\n
\n
PURPOSE: INSPECT PCM CONNECTOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable connector and terminal. (See CONNECTOR INSPECTION<\/a>.)<\/div>\n
\u2022 Are the connector and terminal normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
3<\/div>\n<\/td>\n
\n
PURPOSE: VERIFY IF BODY CONTROL MODULE (BCM) IS INSTALLED CORRECTLY<\/div>\n
\u2022 Verify the body control module (BCM) installation condition. (See BODY CONTROL MODULE (BCM) REMOVAL\/INSTALLATION<\/a>.)<\/div>\n
\u2022 Is the installation condition normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Correctly install the body control module (BCM) and perform the repair completion verification.<\/div>\n
(See BODY CONTROL MODULE (BCM) REMOVAL\/INSTALLATION<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
4<\/div>\n<\/td>\n
\n
PURPOSE: INSPECT BODY CONTROL MODULE (BCM) FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable part. (See BODY CONTROL MODULE (BCM) INSPECTION [(US)]<\/a>.)<\/div>\n
\u2022 Is the part normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n
(See BODY CONTROL MODULE (BCM) REMOVAL\/INSTALLATION<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 1<\/div>\n<\/td>\n
\n
PURPOSE: VERIFY THAT VEHICLE IS REPAIRED<\/div>\n
\u2022 Install\/connect the part removed\/disconnected during the troubleshooting procedure.<\/div>\n
\u2022 Clear the DTC recorded in the memory. (See CLEARING DTC<\/a>.)<\/div>\n
\u2022 Replicate the vehicle conditions at the time the DTC was detected using the following procedure.<\/div>\n
\n
\n
\u2015 Perform the KOEO or KOER self test. (See DTC INSPECTION<\/a>.)<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Perform the DTC inspection for the PCM. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Is the same Pending DTC present?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.<\/div>\n
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)]<\/a>.)<\/div>\n
If the CAN communication is normal, perform the diagnosis from Step 1.<\/div>\n
\u2022 If the malfunction recurs, replace the PCM, then go to the next step. (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 2<\/div>\n<\/td>\n
\n
PURPOSE: VERIFY IF OTHER DTCs DISPLAYED<\/div>\n
\u2022 Perform the DTC inspection. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Are any other DTCs displayed?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Repair the malfunctioning location according to the applicable DTC troubleshooting.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
DTC troubleshooting completed.<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

DTC U2300:00 [PCM (SKYACTIV-G (US))] SM2565531 id0102t42283u0 Note \u2022 To determine the malfunctioning part, proceed with the diagnostics from “Function Inspection Using M-MDS”. Details On DTCs Description Global central configuration error Detection condition Determination conditions \u2022 Any of following conditions occurs: \u2015 No configuration of the body control module (BCM). \u2015 The configuration signal with the estimated CAN ID is not sent from the body control module (BCM). \u2015 The configuration signal value sent via […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-9977","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9977","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=9977"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9977\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=9977"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}