{"id":9930,"date":"2022-03-10T20:30:51","date_gmt":"2022-03-10T20:30:51","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2565483\/"},"modified":"2022-03-10T20:30:51","modified_gmt":"2022-03-10T20:30:51","slug":"sm2565483","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2565483\/","title":{"rendered":"POWER DOOR AND FUEL-FILLER LID LOCK SYSTEM [(US)]"},"content":{"rendered":"
\n

POWER DOOR AND FUEL-FILLER LID LOCK SYSTEM [(US)]<\/h3>\n<\/div>\n

SM2565483<\/p>\n

<\/p>\n
\n
\n
\n

id0914000092x1<\/p>\n



\n<\/a><\/p>\n

Outline<\/p>\n

\u2022 When the door lock switch or the remote transmitter or the touch sensor located in outer handle is operated to lock\/unlock, all the doors and the fuel-filler lid lock\/unlock.<\/div>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\n
\u2022 When the touch sensor located in the outer handle of the driver-side door is operated to unlock, the driver-side door and fuel-filler lid unlocks.<\/div>\n
\u2022 When the remote transmitter’s unlock button is operated to unlock, the driver-side door and fuel-filler lid unlock, and when the unlock button is operated again within 5 sec, the other doors unlock.<\/div>\n
\u2022 The fuel-filler lid lock operation is delayed based on the personalized delay time.<\/div>\n<\/div>\n<\/dd>\n<\/dl>\n



\n<\/a><\/p>\n

Function<\/p>\n


<\/p>\n

<\/a><\/p>\n

Door lock switch interlock function<\/p>\n

\n
\n
\u2022 When the door lock switch is operated to lock\/unlock, all the doors and fuel-filler lid lock\/unlock.<\/div>\n<\/dd>\n<\/dl>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 The time until the fuel-filler lid is locked after locking the driver\u2019s door can be changed.(Initial time is 90 sec<\/span>)<\/div>\n<\/dd>\n<\/dl>\n


<\/p>\n

<\/a><\/p>\n

2-step unlocking function<\/p>\n

\n
\n
\u2022 When the remote transmitter’s unlock button is operated to unlock, only the driver-side door unlocks, and when the unlock button is operated again within 5 se, the other doors and the fuel-filler lid unlock.<\/div>\n<\/dd>\n<\/dl>\n


<\/p>\n

<\/a><\/p>\n

Collision detection unlock function<\/p>\n

\n
\n
\u2022 This function unlocks the doors in case of a collision to enhance rescue operation from outside the vehicle.<\/div>\n<\/dd>\n<\/dl>\n


<\/p>\n

<\/a><\/p>\n

Auto door lock function<\/p>\n

\n
\n
\u2022 All doors and fuel-filler lid automatically lock\/unlock in conjunction with the vehicle speed and the operation of the selector lever (ATX) and the ignition switch.<\/div>\n<\/dd>\n<\/dl>\n



\n<\/a><\/p>\n

Structural view<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzn00008200<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

System wiring diagram<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
ac30zn00000574<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Operation<\/p>\n


<\/p>\n

<\/a><\/p>\n

Lock operation using door lock switch<\/p>\n

1.When the door-electrical supply unit (driver\u2019s side) detects a door lock switch lock signal (1), it sends a door lock switch lock signal (2) using CAN communication to the body control module (BCM).<\/p>\n

\n

2.When the body control module (BCM) receives a door lock switch lock signal (2), it determines the door lock operation and sends an all door lock signal (3) using CAN communication to the door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) and electrical supply unit (ESU).<\/p>\n

\n

3.When the door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) and electrical supply unit (ESU) receive an all door lock signal (3), the door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) turns the FET (lock side) on (4), and the electrical supply unit (ESU) turns the transistor on (4) and then the relay turns on (4).<\/p>\n

\n

4.When the FET (lock side) turns on (4), the front and rear door latch and lock actuator motors perform a lock operation (5), and the front and rear doors lock. When the relay turns on, the fuel-filler lid lock actuator motor performs a lock operation, and the fuel-filler lid locks.<\/p>\n

\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 The time until the fuel-filler lid is locked after locking the driver\u2019s door can be changed.(Initial time is 90 sec<\/span>)<\/div>\n<\/dd>\n<\/dl>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
ac30zn00000575<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/p>\n

<\/a><\/p>\n

Unlock operation using the door lock switch<\/p>\n

1.When the door-electrical supply unit (driver\u2019s side) detects a door lock switch unlock signal (1), it sends a door lock switch unlock signal (2) using CAN communication to the body control module (BCM).<\/p>\n

\n

2.When the body control module (BCM) receives a door lock switch unlock signal (2), it determines the door unlock operation and sends an all door unlock signal (3) using CAN communication to the door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) and the electrical supply unit (ESU).<\/p>\n

\n

3.When the door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) and the electrical supply unit (ESU) receive an all door unlock signal (3), the door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) turn the transistor on (4) and turn the door unlock relay on (4), at the same time FET (unlock side) on (4), and the electrical supply unit (ESU) turns the transistor on and then the relay turns on.<\/p>\n

\n

4.When the door unlock relay (4) and FET (unlock side) turns on (4), the front and rear door latch and lock actuator motors perform an unlock operation (5), and the front and rear doors unlock. When the relay turns on, the fuel-filler lid lock actuator motor performs an unlock operation, and the fuel-filler lid unlock.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
ac30zn00000576<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

2-Step Unlocking Function Operation Using Keyless Entry Remote Transmitter<\/p>\n


<\/p>\n

<\/a><\/p>\n

Timing chart of 2-step unlocking function operation using keyless entry remote transmitter<\/p>\n

\n
\n
\u2022 If the following condition is met with all the doors locked, the 2-step unlocking function operates.<\/div>\n
\n
\n
\u2015 The body control module (BCM) receives an unlock signal, and within 5 s<\/span>ec it receives another unlock signal.<\/div>\n<\/dd>\n<\/dl>\n<\/dd>\n<\/dl>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
ac30zn00000623<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

1.When the UNLOCK button on the keyless entry remote transmitter is operated, the keyless entry remote transmitter sends an unlock signal to the keyless receiver (1).<\/p>\n

\n

2.When the keyless receiver recveives an unlock signal, it sends an unlock signal to the LF control unit (2).<\/p>\n

\n

3.When the LF control unit receives an unlock signal, it sends an unlock signal by using SERIAL LFU (UART) to the body control module (BCM) (3).<\/p>\n

\n

4.When the control module (BCM) receives an unlock signal, it sends a driver\u2019s door unlock signal (4) by using CAN communication to the door-electrical supply unit (driver\u2019s side).<\/p>\n

\n

5.When the door-electrical supply unit (driver\u2019s side) receives a driver\u2019s door unlock signal (4), it turns the transistor on (5) and turns the door unlock relay on (5), at the same time the FET (unlock side) on (5). When the electrical supply unit (ESU) receives a driver\u2019s door unlock signal (4), it turns the transistor on (5) and turns the relay on. The fuel-filler lid actuator motor performs an unlock operation, and the fuel-filler lid unlocks.<\/p>\n

\n

6.When the door unlock relay and FET (unlock side) turn on (5), the driver\u2019s door unlock actuator motor performs an unlock operation (6), and the driver\u2019s door unlock.<\/p>\n

\n

7.If the body control module (BCM) receives another unlock signal within 5 sec<\/span> after it received the first unlock signal, it sends an all door unlock signal (7) by using CAN communication to the door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) and electrical supply unit (ESU).<\/p>\n

\n

8.When the door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) receive an all door unlock signal (7), it turns the transistor on (8) and turns the door unlock relay on (8), at the same time the FET (unlock side) turns on (8).<\/p>\n

\n

9.When the door unlock relay and the FET (unlock side) turn on (8), all the door\u2019s unlock actuator motors perform an unlock operation (9), and all door unlocks.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
ac30zn00000577<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Collision detection unlock function operation<\/p>\n

1.When an air bag deploys, the SAS control module sends an air bag deployment signal (1) to the door-electrical supply unit(driver\u2019s side) and the door-electrical supply unit(passenger\u2019s side) as a CAN signal via the body control module (BCM).At the same time, the SAS control module sends an airbag deployment signal (1) to the door-electrical supply unit(driver\u2019s side) and the door-electrical supply unit(passenger\u2019s side) as a serial signal.<\/p>\n

\n

2.The door-electrical supply unit (driver\u2019s side) and the door-electrical supply unit (passenger\u2019s side) receives the air bag deployment signal (1) and after approx. 6 sec<\/span>, it operates (2) the front and rear door lock actuator motors, and the front and rear doors unlock.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
ac30zn00000544<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Auto Door Lock Operation<\/p>\n

Selector lever interlock door lock\/unlock control (ATX)<\/div>\n
\u2022 The doors and fuel-filler lid lock when the selector lever is shifted to a position other than the P position with all the following conditions met.\/<\/div>\n
\n
\n
\u2015 Theft-deterrent system in operation stop-mode, initial mode, or stand-by preparatory mode (See THEFT-DETERRENT SYSTEM [(US)]<\/a>)<\/div>\n
\u2015 Ignition switch ON (engine on) is detected<\/div>\n
\u2015 All door latch switch OFF (all doors closed condition) is detected<\/div>\n
\u2015 Liftgate latch switch OFF (liftgate closed condition) is detected<\/div>\n
\u2015 Vehicle is determined to be driven<\/div>\n<\/dd>\n<\/dl>\n
\u2022 The doors and fuel-filler lid unlock when the selector lever is shifted to the P position with all the following conditions met.<\/div>\n
\n
\n
\u2015 Theft-deterrent system in operation stop-mode, initial mode, or stand-by preparatory mode (See THEFT-DETERRENT SYSTEM [(US)]<\/a>)<\/div>\n
\u2015 Ignition switch ON (engine off or on) is detected<\/div>\n<\/dd>\n<\/dl>\n
Vehicle speed interlock door lock control<\/div>\n
\u2022 The doors and fuel-filler lid unlock when the vehicle speed of 20 km\/h{12 mph}<\/span> or more is detected with all the following conditions met.<\/div>\n
\n
\n
\u2015 Theft-deterrent system in operation stop-mode, initial mode, or stand-by preparatory mode (See THEFT-DETERRENT SYSTEM [(US)]<\/a>)<\/div>\n
\u2015 Ignition switch ON (engine on) is detected<\/div>\n
\u2015 All door latch switch OFF (all doors closed condition) is detected<\/div>\n
\u2015 Liftgate latch switch OFF (liftgate closed condition) is detected<\/div>\n<\/dd>\n<\/dl>\n
IG interlock door unlock control<\/div>\n
\u2022 The doors and fuel-filler lid unlock when the ignition is switched to ACC of OFF from ON (engine on) with all the following conditions met.<\/div>\n
\n
\n
\u2015 Theft-deterrent system in operation stop-mode, initial mode, or stand-by preparatory mode (See THEFT-DETERRENT SYSTEM [(US)]<\/a>)<\/div>\n
\u2015 Doors locked by selector lever interlock door lock control or vehicle interlock door lock control<\/div>\n<\/dd>\n<\/dl>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 The time until the fuel-filler lid is locked by auto door lock operation cannot be changed.<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

POWER DOOR AND FUEL-FILLER LID LOCK SYSTEM [(US)] SM2565483 id0914000092x1 Outline \u2022 When the door lock switch or the remote transmitter or the touch sensor located in outer handle is operated to lock\/unlock, all the doors and the fuel-filler lid lock\/unlock. Note \u2022 When the touch sensor located in the outer handle of the driver-side door is operated to unlock, the driver-side door and fuel-filler lid unlocks. \u2022 When the remote transmitter’s unlock button is […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-9930","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9930","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=9930"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9930\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=9930"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}