{"id":9682,"date":"2022-03-10T20:30:49","date_gmt":"2022-03-10T20:30:49","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2337314\/"},"modified":"2022-03-10T20:30:49","modified_gmt":"2022-03-10T20:30:49","slug":"sm2337314","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2337314\/","title":{"rendered":"TROUBLESHOOTING PROCEDURE [(US)]"},"content":{"rendered":"
\n

TROUBLESHOOTING PROCEDURE [(US)]<\/h3>\n<\/div>\n

SM2337314<\/p>\n

<\/p>\n
\n
\n
\n

id9902000002a1<\/p>\n

\u2022 If there is any vehicle malfunction complaint lodged by a customer, perform malfunction diagnosis according to the troubleshooting procedure. (See Troubleshooting Procedure<\/a>.)<\/div>\n



\n<\/a><\/p>\n

Troubleshooting Procedure<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00031577<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00024768<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
*1 :(See Action for Non-repeatable Malfunction<\/a>.)<\/div>\n
*2 :(See PUSH BUTTON START SYSTEM DOES NOT OPERATE [SECURITY AND LOCKS]<\/a>.)<\/div>\n
*3 :(See ERROR IS DISPLAYED ON VEHICLE IDENTIFICATION [BETWEEN VEHICLE AND VCM-2] SCREEN [(US)]<\/a>.)<\/div>\n
*4 :(See ERROR IS DISPLAYED ON VEHICLE IDENTIFICATION [VEHICLE INFORMATION ACQUISITION] SCREEN [(US)]<\/a>.)<\/div>\n
*5 :(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)]<\/a>.)<\/div>\n



\n<\/a><\/p>\n

Action for Non-repeatable Malfunction<\/p>\n

\u2022 If the malfunction does not recur, perform the following inspection.<\/div>\n
\n
\n
1. Perform the DTC inspection and repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC INSPECTION<\/a>.)<\/div>\n
2. Based on the repair order form, attempt to drive the vehicle or perform tests to determine the malfunction cause according to the data (such as module voltage) at that time.<\/div>\n
3. Perform vibration inspection. (See Vibration inspection<\/a>.)<\/div>\n
4. Inspect the female terminals on the connector of the electric component which is suspected to be the cause of the malfunction for poor connection. (See ELECTRICAL SYSTEM [(US)]<\/a>.)<\/p>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 Tool used (Reference): terminal test kit (49US-15-KIT)<\/p>\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00027046<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n
5. Verify if the malfunction symptom occurs during high engine load (switches such as headlights, A\/C, wipers are on).<\/div>\n
6. If a commercially-available electrical device has been installed, verify if the malfunction symptom occurs while the device is removed.<\/div>\n
7. Warm the electric system components using a hair dryer and verify that the voltage (resistance) does not change.<\/p>\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
atsvuw00000091<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
8. Perform water spraying inspection. (See Water spraying inspection<\/a>.)<\/div>\n<\/dd>\n<\/dl>\n


<\/p>\n

<\/a><\/p>\n

Vibration inspection<\/p>\n

\n
\n
\u2022 If there is a malfunction while the vehicle vibrates such as while driving on a rough-road, perform the following procedure.<\/p>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\n
\u2022 The following are possible causes for an electrical malfunction caused by vehicle vibration.<\/div>\n
\n
\n
\u2015 Connector connection malfunction<\/div>\n
\u2015 There is no play in the wiring harness.<\/div>\n
\u2015 The wiring harness contacts a moving part.<\/div>\n
\u2015 The wiring harness is close to a high-temperature part.<\/div>\n<\/dd>\n<\/dl>\n
\u2022 If the wiring harness is not routed correctly, it may be caught between some parts.<\/div>\n
\u2022 The main areas to be inspected include the connecting area of a connector, areas that vibrate, or areas where a wiring harness passes though the firewall or body panel.<\/div>\n<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n<\/dd>\n<\/dl>\n

1.Display the PIDs for the electrical system components (such as switches, sensors, actuators, and relays) suspected to be the malfunction cause. (See PID\/DATA MONITOR INSPECTION<\/a>.)<\/p>\n

\n

2.When inspecting a switch, turn the switch on manually.<\/p>\n

\n

\n
\n
Caution<\/div>\n<\/dd>\n
\n
\u2022 Do not apply excessive force when shaking the part or wiring harness. Otherwise, an open circuit may occur.<\/div>\n<\/dd>\n<\/dl>\n

3.Lightly shake connectors and wiring harnesses while verifying the PID value.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
atsvuw00000070<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n
\n
\u2022 If a PID value does not stabilize, inspect the connector and terminal for poor connection.<\/div>\n<\/dd>\n<\/dl>\n

4.Lightly shake a part while verifying the PID value.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
atsvuw00000071<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n
\n
\u2022 If the PID value does not stabilize or a part mis-operation occurs, inspect the connector and terminal for a poor connection and the part for poor installation.<\/div>\n<\/dd>\n<\/dl>\n

5.Operate the simulation function for the electric system component suspected to be the malfunction cause. (See SIMULATION INSPECTION<\/a>.)<\/p>\n

\n

6.Lightly shake the part after operating the simulation function.<\/p>\n

\n

\n
\n
\u2022 If abnormal noise occurs from the part, inspect the connector and terminal for poor connection and the part for poor installation.<\/div>\n<\/dd>\n<\/dl>\n


<\/p>\n

<\/a><\/p>\n

Water spraying inspection<\/p>\n

\n
\n
\u2022 If the malfunction occurred during high humidity, heavy rain, or heavy snow conditions, perform the following procedure.<\/div>\n<\/dd>\n<\/dl>\n
\n
\n
Caution<\/div>\n<\/dd>\n
\n
\u2022 Spray water on the front of the radiator to change the temperature and humidity indirectly. If water leaks into the vehicle, it could damage a module. If there is the possibility of water leaking into the vehicle, carefully perform the inspection.<\/div>\n<\/dd>\n<\/dl>\n

1.Display the PIDs for the electrical system components (such as switches, sensors, actuators, and relays) suspected to be the malfunction cause. (See PID\/DATA MONITOR INSPECTION<\/a>.)<\/p>\n

\n

2.When inspecting a switch, turn the switch on manually.<\/p>\n

\n

3.Spray water on the vehicle.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
azzjjw00001888<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n
\n
\u2022 If the PID value does not stabilize or there is a malfunction, inspect the applicable part.<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

TROUBLESHOOTING PROCEDURE [(US)] SM2337314 id9902000002a1 \u2022 If there is any vehicle malfunction complaint lodged by a customer, perform malfunction diagnosis according to the troubleshooting procedure. (See Troubleshooting Procedure.) Troubleshooting Procedure am3zzw00031577 am3zzw00024768 *1 :(See Action for Non-repeatable Malfunction.) *2 :(See PUSH BUTTON START SYSTEM DOES NOT OPERATE [SECURITY AND LOCKS].) *3 :(See ERROR IS DISPLAYED ON VEHICLE IDENTIFICATION [BETWEEN VEHICLE AND VCM-2] SCREEN [(US)].) *4 :(See ERROR IS DISPLAYED ON VEHICLE IDENTIFICATION [VEHICLE INFORMATION ACQUISITION] […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-9682","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9682","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=9682"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9682\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=9682"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}