{"id":9300,"date":"2022-03-10T20:30:46","date_gmt":"2022-03-10T20:30:46","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2336337\/"},"modified":"2022-03-10T20:30:46","modified_gmt":"2022-03-10T20:30:46","slug":"sm2336337","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2336337\/","title":{"rendered":"BUMPER SLIDER REMOVAL\/INSTALLATION"},"content":{"rendered":"
\n

BUMPER SLIDER REMOVAL\/INSTALLATION<\/h3>\n<\/div>\n

SM2336337<\/p>\n

<\/p>\n
\n
\n
\n

id091000822500<\/p>\n



\n<\/a><\/p>\n

Front Bumper Slider<\/p>\n


<\/p>\n

<\/a><\/p>\n

Front bumper slider No.1<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the following parts:<\/p>\n

\n

\n
(1)Upper face (See UPPER FACE REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Front bumper (See FRONT BUMPER REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Front combination light (See FRONT COMBINATION LIGHT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

3.Remove the bolt shown in the figure.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3uuw00015025<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4.Move the front bumper slider No.1 tab in the direction of the arrow shown in the figure and detach it from the front fender stay.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00023254<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Pull front bumper slider No.1 in the direction of the arrow shown in the figure while detaching the tab and pin.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00023255<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6.Install in the reverse order of removal.<\/p>\n

\n

7.Adjust the headlight aiming. (See HEADLIGHT AIMING [(US)]<\/a>.)<\/p>\n

\n

8.Perform the 360\u00b0 view monitor system aiming. (with 360\u00b0 view monitor system) (See 360\u00b0VIEW MONITOR SYSTEM AIMING<\/a>.)<\/p>\n

\n

9.Perform the front radar sensor aiming adjustment. (with front radar sensor) (See FRONT RADAR SENSOR AIMING<\/a>.)<\/p>\n

\n

10.Perform the front side radar sensor aiming adjustment. (with front side radar sensor) (See FRONT SIDE\/REAR SIDE RADAR SENSOR AIMING<\/a>.)<\/p>\n

\n


<\/p>\n

<\/a><\/p>\n

Front bumper slider No.2<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the following parts:<\/p>\n

\n

\n
(1)Upper face (See UPPER FACE REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Front bumper (See FRONT BUMPER REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Front combination light (See FRONT COMBINATION LIGHT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

3.Remove the screw.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00023256<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4.Move front bumper slider No.2 in the direction of the arrow shown in the figure and remove it while detaching tabs A and B.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3uuw00015029<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Install in the reverse order of removal.<\/p>\n

\n

6.Adjust the headlight aiming. (See HEADLIGHT AIMING [(US)]<\/a>.)<\/p>\n

\n

7.Perform the 360\u00b0 view monitor system aiming. (with 360\u00b0 view monitor system) (See 360\u00b0VIEW MONITOR SYSTEM AIMING<\/a>.)<\/p>\n

\n

8.Perform the front radar sensor aiming adjustment. (with front radar sensor) (See FRONT RADAR SENSOR AIMING<\/a>.)<\/p>\n

\n

9.Perform the front side radar sensor aiming adjustment. (with front side radar sensor) (See FRONT SIDE\/REAR SIDE RADAR SENSOR AIMING<\/a>.)<\/p>\n

\n



\n<\/a><\/p>\n

Rear Bumper Slider<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the following parts:<\/p>\n

\n

\n
(1)Trunk covering (See TRUNK COVERING REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Trunk board (See TRUNK BOARD REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Trunk end trim (See TRUNK END TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)Trunk side upper trim (5HB) (See TRUNK SIDE UPPER TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(5)Rear combination light (See REAR COMBINATION LIGHT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(6)Rear splash shield (See SPLASH SHIELD REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(7)Rear bumper (See REAR BUMPER REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

3.Remove the screws and nut shown in the figure.<\/p>\n

\n

4SD<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00031785<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5HB<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00031786<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4.Press the hook tabs shown in the figure and remove the rear bumper slider from the rear fender panel.<\/p>\n

\n

\n
\n
Caution<\/div>\n<\/dd>\n
\n
\u2022 When removing, move the rear bumper slider straight out from the rear fender panel so as not to damage the rear bumper slider pin.<\/div>\n<\/dd>\n<\/dl>\n

4SD<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00023259<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5HB<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00023260<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Install in the reverse order of removal.<\/p>\n

\n

6.Perform the 360\u00b0 view monitor system aiming. (with 360\u00b0 view monitor system) (See 360\u00b0VIEW MONITOR SYSTEM AIMING<\/a>.)<\/p>\n

\n

7.Perform the rear side radar sensor aiming adjustment. (with rear side radar sensor) (See FRONT SIDE\/REAR SIDE RADAR SENSOR AIMING<\/a>.)<\/p>\n

\n<\/div>\n

<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

BUMPER SLIDER REMOVAL\/INSTALLATION SM2336337 id091000822500 Front Bumper Slider Front bumper slider No.1 1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)].) 2.Remove the following parts: (1)Upper face (See UPPER FACE REMOVAL\/INSTALLATION [(US)].) (2)Front bumper (See FRONT BUMPER REMOVAL\/INSTALLATION [(US)].) (3)Front combination light (See FRONT COMBINATION LIGHT REMOVAL\/INSTALLATION.) 3.Remove the bolt shown in the figure. am3uuw00015025 4.Move the front bumper slider No.1 tab in the direction of the arrow shown in the figure and […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-9300","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9300","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=9300"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9300\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=9300"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}