{"id":9136,"date":"2022-03-10T20:30:45","date_gmt":"2022-03-10T20:30:45","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2335503\/"},"modified":"2022-03-10T20:30:45","modified_gmt":"2022-03-10T20:30:45","slug":"sm2335503","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2335503\/","title":{"rendered":"INDICATOR INSPECTION"},"content":{"rendered":"
\n

INDICATOR INSPECTION<\/h3>\n<\/div>\n

SM2335503<\/p>\n

<\/p>\n
\n
\n
\n

id051800298300<\/p>\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 The indicator is integrated with the shift panel.<\/div>\n<\/dd>\n<\/dl>\n

1.Remove the shift panel. (See SHIFT PANEL REMOVAL\/INSTALLATION<\/a>.)<\/p>\n

\n

2.Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).<\/p>\n

\n

\n
\n
\u2022 If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.<\/div>\n
\n
\n
\u2015 If the inspection items are normal, replace the shift panel. (See SHIFT PANEL REMOVAL\/INSTALLATION<\/a>.)<\/div>\n<\/dd>\n<\/dl>\n<\/dd>\n<\/dl>\n



\n<\/a><\/p>\n

Terminal Voltage Table (Reference)<\/p>\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00034564<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\n

\u2014: Not applicable<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Terminal<\/p>\n<\/th>\n

\n

Connected to<\/p>\n<\/th>\n

\n

Test condition<\/p>\n<\/th>\n

\n

Voltage (V)<\/p>\n<\/th>\n

\n

Inspection item(s)<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
A<\/div>\n<\/td>\n
\n
Battery<\/div>\n<\/td>\n
\n
Under any condition<\/div>\n<\/td>\n
\n
B+<\/div>\n<\/td>\n
\n
\u2022 Wiring harness between indicator terminal A and battery positive terminal<\/div>\n<\/td>\n<\/tr>\n
\n
B<\/div>\n<\/td>\n
\n
IG1 relay No.2<\/div>\n<\/td>\n
\n
Ignition is switched ON<\/div>\n<\/td>\n
\n
B+<\/div>\n<\/td>\n
\n
\u2022 Wiring harness between indicator terminal B and IG1 relay No.2 terminal C<\/div>\n<\/td>\n<\/tr>\n
\n
Except above<\/div>\n<\/td>\n
\n
Below 1.0<\/div>\n<\/td>\n<\/tr>\n
\n
C<\/div>\n<\/td>\n
\n
Selector lever component (shift-lock solenoid)<\/div>\n<\/td>\n
\n
The following conditions are met (except emergency manual shift-lock release system is operated)<\/div>\n
\u2015 Selector lever is in P position<\/div>\n
\u2015 Ignition is switched to ON<\/div>\n
\u2015 Brake pedal is depressed (brake light switch is on)<\/div>\n<\/td>\n
\n
Below 1.0<\/div>\n<\/td>\n
\n
\u2022 Wiring harness between indicator terminal C and selector lever component terminal E<\/div>\n<\/td>\n<\/tr>\n
\n
Except above<\/div>\n<\/td>\n
\n
B+<\/div>\n<\/td>\n<\/tr>\n
\n
D<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n<\/tr>\n
\n
E<\/div>\n<\/td>\n
\n
CAN module<\/div>\n<\/td>\n
\n
This terminal is used for communication and cannot be used for malfunction determination during terminal voltage inspection. Perform a DTC inspection.<\/div>\n<\/td>\n<\/tr>\n
\n
F<\/div>\n<\/td>\n
\n
CAN module<\/div>\n<\/td>\n
\n
This terminal is used for communication and cannot be used for malfunction determination during terminal voltage inspection. Perform a DTC inspection.<\/div>\n<\/td>\n<\/tr>\n
\n
G<\/div>\n<\/td>\n
\n
Selector lever component (up switch)<\/div>\n<\/td>\n
\n
Selector lever is in the M position (+) side position.<\/div>\n<\/td>\n
\n
Below 1.0<\/div>\n<\/td>\n
\n
\u2022 Wiring harness between indicator terminal G and selector lever component terminal F<\/div>\n<\/td>\n<\/tr>\n
\n
Selector lever is not in the M position (+) side position.<\/div>\n<\/td>\n
\n
B+<\/div>\n<\/td>\n<\/tr>\n
\n
H<\/div>\n<\/td>\n
\n
Selector lever component (down switch)<\/div>\n<\/td>\n
\n
Selector lever is in the M position (\u2212) side position.<\/div>\n<\/td>\n
\n
Below 1.0<\/div>\n<\/td>\n
\n
\u2022 Wiring harness between indicator terminal H and selector lever component terminal D<\/div>\n<\/td>\n<\/tr>\n
\n
Selector lever is not in the M position (\u2212) side position.<\/div>\n<\/td>\n
\n
B+<\/div>\n<\/td>\n<\/tr>\n
\n
I<\/div>\n<\/td>\n
\n
Selector lever component (M position switch)<\/div>\n<\/td>\n
\n
Selector lever is in the M position.<\/div>\n<\/td>\n
\n
Below 1.0<\/div>\n<\/td>\n
\n
\u2022 Wiring harness between indicator terminal I and selector lever component terminal B<\/div>\n<\/td>\n<\/tr>\n
\n
Selector lever is not in the M position.<\/div>\n<\/td>\n
\n
B+<\/div>\n<\/td>\n<\/tr>\n
\n
J<\/div>\n<\/td>\n
\n
Ground point<\/div>\n<\/td>\n
\n
Under any condition<\/div>\n<\/td>\n
\n
Approx. 0<\/div>\n<\/td>\n
\n
\u2022 Ground point<\/div>\n
\u2022 Wiring harness between indicator terminal J and ground point<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

INDICATOR INSPECTION SM2335503 id051800298300 Note \u2022 The indicator is integrated with the shift panel. 1.Remove the shift panel. (See SHIFT PANEL REMOVAL\/INSTALLATION.) 2.Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference). \u2022 If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses. \u2015 If the inspection items are normal, replace the shift panel. […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-9136","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9136","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=9136"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/9136\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=9136"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}