{"id":8911,"date":"2022-03-10T20:30:43","date_gmt":"2022-03-10T20:30:43","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2334498\/"},"modified":"2022-03-10T20:30:43","modified_gmt":"2022-03-10T20:30:43","slug":"sm2334498","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2334498\/","title":{"rendered":"DTC P0806:00 [PCM (SKYACTIV-G)]"},"content":{"rendered":"
\n

DTC P0806:00 [PCM (SKYACTIV-G)]<\/h3>\n<\/div>\n

SM2334498<\/p>\n

<\/p>\n
\n
\n
\n

id0102t4606700<\/p>\n



\n<\/a><\/p>\n

Outline<\/p>\n

\n\n\n\n\n\n\n\n\n\n
\n

System malfunction location<\/p>\n<\/th>\n

\n

Clutch stroke sensor input circuit problem<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
Detection condition<\/span><\/div>\n<\/td>\n
\n
\u2022 The PCM monitors changes in input voltage from the clutch stroke sensor. If the PCM does not detect a voltage change while the vehicle runs with vehicle speed above 30 km\/h {19 mph}<\/span> and stops 8 times<\/span> alternately, the PCM determines that the clutch stroke sensor circuit has a malfunction.<\/div>\n<\/td>\n<\/tr>\n
\n
Fail-safe<\/span><\/div>\n<\/td>\n
\n
\u2022 Not applicable<\/div>\n<\/td>\n<\/tr>\n
\n
Possible cause<\/span><\/div>\n<\/td>\n
\n
\u2022 Clutch stroke sensor connector or terminals malfunction<\/div>\n
\u2022 PCM connector or terminals malfunction<\/div>\n
\u2022 Short to ground in any of the following clutch stroke sensor circuits.<\/div>\n
\n
\n
\u2015 Power supply circuit<\/div>\n
\u2015 Signal circuit<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Short to power supply in any of the following clutch stroke sensor circuits.<\/div>\n
\n
\n
\u2015 Signal circuit<\/div>\n
\u2015 Ground circuit<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Open circuit in any of the following clutch stroke sensor circuits.<\/div>\n
\n
\n
\u2015 Power supply circuit<\/div>\n
\u2015 Signal circuit<\/div>\n
\u2015 Ground circuit<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Clutch stroke sensor malfunction<\/div>\n
\u2022 Driver continues to depress clutch pedal causing mistaken detection by PCM<\/div>\n
\u2022 PCM malfunction<\/div>\n<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Diagnostic Procedure<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Step<\/p>\n<\/th>\n

\n

Inspection<\/p>\n<\/th>\n

\n

Results<\/p>\n<\/th>\n

\n

Action<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
1<\/div>\n<\/td>\n
\n
RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION<\/div>\n
\u2022 Record the freeze frame data\/snapshot data.<\/p>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 Recording can be facilitated using the screen capture function of the PC.<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
2<\/div>\n<\/td>\n
\n
VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY<\/div>\n
\u2022 Verify related Service Bulletins, on-line repair information, or Service Information availability.<\/div>\n
\u2022 Is any related Information available?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Perform repair or diagnosis according to the available information.<\/div>\n
\u2022 If the vehicle is not repaired, go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
3<\/div>\n<\/td>\n
\n
INSPECT CLUTCH STROKE SENSOR CONNECTOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable connector and terminal. (See CONNECTOR INSPECTION<\/a>.)<\/div>\n
\u2022 Are the connector and terminal normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
4<\/div>\n<\/td>\n
\n
INSPECT PCM CONNECTOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable connector and terminal. (See CONNECTOR INSPECTION<\/a>.)<\/div>\n
\u2022 Are the connector and terminal normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
5<\/div>\n<\/td>\n
\n
INSPECT CLUTCH STROKE SENSOR POWER SUPPLY CIRCUIT AND SIGNAL CIRCUIT FOR SHORT TO GROUND<\/div>\n
\u2022 Inspect the applicable circuit for a short to ground. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
6<\/div>\n<\/td>\n
\n
INSPECT CLUTCH STROKE SENSOR SIGNAL CIRCUIT AND GROUND CIRCUIT FOR SHORT TO POWER SUPPLY<\/div>\n
\u2022 Inspect the applicable circuit for a short to power supply. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
7<\/div>\n<\/td>\n
\n
INSPECT CLUTCH STROKE SENSOR POWER SUPPLY CIRCUITS, SIGNAL CIRCUITS, AND GROUND CIRCUITS FOR OPEN CIRCUIT<\/div>\n
\u2022 Inspect the applicable circuit for open circuit. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
8<\/div>\n<\/td>\n
\n
INSPECT CLUTCH STROKE SENSOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable part. (See CLUTCH STROKE SENSOR INSPECTION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See CLUTCH STROKE SENSOR INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n
\u2022 Is the part normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n
(See CLUTCH MASTER CYLINDER REMOVAL\/INSTALLATION [C66M-R (US)]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
9<\/div>\n<\/td>\n
\n
VERIFY THAT THERE IS NO PROBLEM WITH CUSTOMER CLUTCH PEDAL OPERATION<\/div>\n
\u2022 Is the clutch pedal depressed after operating the shift lever during a traffic jam?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Explain to the customer that it is necessary to remove the foot from the clutch pedal completely after operating the shift lever.<\/div>\n
Go to repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 1<\/div>\n<\/td>\n
\n
VERIFY THAT VEHICLE IS REPAIRED<\/div>\n
\u2022 Install\/connect the part removed\/disconnected during the troubleshooting procedure.<\/div>\n
\u2022 Clear the DTC recorded in the memory. (See CLEARING DTC<\/a>.)<\/div>\n
\u2022 Replicate the vehicle conditions at the time the DTC was detected using the following procedure.<\/p>\n
\n
\n
Warning<\/div>\n<\/dd>\n
\n
\n
\u2022 While performing this step, always operate the vehicle in a safe and lawful manner.<\/div>\n
\u2022 When the M-MDS is used to observe monitor system status while driving, be sure to have another technician with you, or record the data in the M-MDS using the PID\/DATA MONITOR AND RECORD capturing function and inspect later.<\/div>\n<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n
\n
\n
\u2015 Operate the clutch pedal while driving the vehicle above 30 km\/h {19 mph}<\/span> and stopping 8 times<\/span> alternately.<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Perform the DTC inspection for the PCM. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Is the same Pending DTC present?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.<\/div>\n
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)]<\/a>.)<\/div>\n
If the CAN communication is normal, perform the diagnosis from Step 1.<\/div>\n
\u2022 If the malfunction recurs, replace the PCM, then go to the next step. (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 2<\/div>\n<\/td>\n
\n
VERIFY IF OTHER DTCs DISPLAYED<\/div>\n
\u2022 Perform the DTC inspection. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Are any other DTCs displayed?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Repair the malfunctioning location according to the applicable DTC troubleshooting.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
DTC troubleshooting completed.<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

DTC P0806:00 [PCM (SKYACTIV-G)] SM2334498 id0102t4606700 Outline System malfunction location Clutch stroke sensor input circuit problem Detection condition \u2022 The PCM monitors changes in input voltage from the clutch stroke sensor. If the PCM does not detect a voltage change while the vehicle runs with vehicle speed above 30 km\/h {19 mph} and stops 8 times alternately, the PCM determines that the clutch stroke sensor circuit has a malfunction. Fail-safe \u2022 Not applicable Possible cause […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-8911","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8911","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=8911"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8911\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=8911"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}