{"id":8888,"date":"2022-03-10T20:30:42","date_gmt":"2022-03-10T20:30:42","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2334459\/"},"modified":"2022-03-10T20:30:42","modified_gmt":"2022-03-10T20:30:42","slug":"sm2334459","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2334459\/","title":{"rendered":"DTC P025B:00 [PCM (SKYACTIV-G)]"},"content":{"rendered":"
\n

DTC P025B:00 [PCM (SKYACTIV-G)]<\/h3>\n<\/div>\n

SM2334459<\/p>\n

<\/p>\n
\n
\n
\n

id0102t4312600<\/p>\n



\n<\/a><\/p>\n

Outline<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
\n

System malfunction location<\/p>\n<\/th>\n

\n

Fuel pump control module circuit range\/performance problem<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
Detection condition<\/span><\/div>\n<\/td>\n
\n
\u2022 When any of the following conditions is met:<\/div>\n
\n
\n
\u2015 PCM detects overheating in fuel pump control module.<\/div>\n
\u2015 Output duty ratio signal received from PCM is in error.<\/div>\n
\u2015 Temperature detection thermistor in fuel pump control module is malfunctioning.<\/div>\n
\u2015 Output signal from fuel pump control module is erratic (noise overlap).<\/div>\n<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
\n
Fail-safe<\/span><\/div>\n<\/td>\n
\n
\u2022 Stops fuel pump control. (If overheating is detected in fuel pump control module)<\/div>\n<\/td>\n<\/tr>\n
\n
Possible cause<\/span><\/div>\n<\/td>\n
\n
\u2022 Fuel pump control module connector or terminals malfunction<\/div>\n
\u2022 PCM connector or terminals malfunction<\/div>\n
\u2022 Short to ground in fuel pump control module control circuit<\/div>\n
\u2022 Short to power supply in fuel pump control module control circuit<\/div>\n
\u2022 Open circuit in fuel pump control module control circuit<\/div>\n
\u2022 Fuel pump control module malfunction<\/div>\n
\u2022 PCM malfunction<\/div>\n<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Diagnostic Procedure<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Step<\/p>\n<\/th>\n

\n

Inspection<\/p>\n<\/th>\n

\n

Results<\/p>\n<\/th>\n

\n

Action<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
1<\/div>\n<\/td>\n
\n
RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION<\/div>\n
\u2022 Record the freeze frame data\/snapshot data.<\/p>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 Recording can be facilitated using the screen capture function of the PC.<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
2<\/div>\n<\/td>\n
\n
VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY<\/div>\n
\u2022 Verify related Service Bulletins, on-line repair information, or Service Information availability.<\/div>\n
\u2022 Is any related Information available?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Perform repair or diagnosis according to the available information.<\/div>\n
\u2022 If the vehicle is not repaired, go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
3<\/div>\n<\/td>\n
\n
INSPECT FUEL PUMP CONTROL MODULE CONNECTOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable connector and terminal. (See CONNECTOR INSPECTION<\/a>.)<\/div>\n
\u2022 Are the connector and terminal normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
4<\/div>\n<\/td>\n
\n
INSPECT PCM CONNECTOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable connector and terminal. (See CONNECTOR INSPECTION<\/a>.)<\/div>\n
\u2022 Are the connector and terminal normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
5<\/div>\n<\/td>\n
\n
INSPECT FUEL PUMP CONTROL MODULE CONTROL CIRCUIT FOR SHORT TO GROUND<\/div>\n
\u2022 Inspect the applicable circuit for a short to ground. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
6<\/div>\n<\/td>\n
\n
INSPECT FUEL PUMP CONTROL MODULE CONTROL CIRCUIT FOR SHORT TO POWER SUPPLY<\/div>\n
\u2022 Inspect the applicable circuit for a short to power supply. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
7<\/div>\n<\/td>\n
\n
INSPECT FUEL PUMP CONTROL MODULE CONTROL CIRCUIT FOR OPEN CIRCUIT<\/div>\n
\u2022 Inspect the applicable circuit for open circuit. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
8<\/div>\n<\/td>\n
\n
INSPECT FUEL PUMP CONTROL MODULE FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable part. (See FUEL PUMP CONTROL MODULE INSPECTION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See FUEL PUMP CONTROL MODULE INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n
\u2022 Is the part normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n
(See FUEL PUMP CONTROL MODULE REMOVAL\/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n
(See FUEL PUMP CONTROL MODULE REMOVAL\/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 1<\/div>\n<\/td>\n
\n
VERIFY THAT VEHICLE IS REPAIRED<\/div>\n
\u2022 Install\/connect the part removed\/disconnected during the troubleshooting procedure.<\/div>\n
\u2022 Clear the DTC recorded in the memory. (See CLEARING DTC<\/a>.)<\/div>\n
\u2022 Replicate the vehicle conditions at the time the DTC was detected using the following procedure.<\/div>\n
\n
\n
\u2015 Perform the KOEO or KOER self test. (See DTC INSPECTION<\/a>.)<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Perform the DTC inspection for the PCM. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Is the same Pending DTC present?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.<\/div>\n
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)]<\/a>.)<\/div>\n
If the CAN communication is normal, perform the diagnosis from Step 1.<\/div>\n
\u2022 If the malfunction recurs, replace the PCM, then go to the next step. (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 2<\/div>\n<\/td>\n
\n
VERIFY IF OTHER DTCs DISPLAYED<\/div>\n
\u2022 Perform the DTC inspection. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Are any other DTCs displayed?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Repair the malfunctioning location according to the applicable DTC troubleshooting.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
DTC troubleshooting completed.<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

DTC P025B:00 [PCM (SKYACTIV-G)] SM2334459 id0102t4312600 Outline System malfunction location Fuel pump control module circuit range\/performance problem Detection condition \u2022 When any of the following conditions is met: \u2015 PCM detects overheating in fuel pump control module. \u2015 Output duty ratio signal received from PCM is in error. \u2015 Temperature detection thermistor in fuel pump control module is malfunctioning. \u2015 Output signal from fuel pump control module is erratic (noise overlap). Fail-safe \u2022 Stops fuel […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-8888","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8888","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=8888"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8888\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=8888"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}