{"id":8857,"date":"2022-03-10T20:30:42","date_gmt":"2022-03-10T20:30:42","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2334416\/"},"modified":"2022-03-10T20:30:42","modified_gmt":"2022-03-10T20:30:42","slug":"sm2334416","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2334416\/","title":{"rendered":"DTC P2226:00 [PCM (SKYACTIV-G)]"},"content":{"rendered":"
\n

DTC P2226:00 [PCM (SKYACTIV-G)]<\/h3>\n<\/div>\n

SM2334416<\/p>\n

<\/p>\n
\n
\n
\n

id0102t4159300<\/p>\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 To determine the malfunctioning part, proceed with the diagnostics from “Function Inspection Using M-MDS”.<\/div>\n<\/dd>\n<\/dl>\n



\n<\/a><\/p>\n

Details On DTCs<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Description<\/p>\n<\/th>\n

\n

BARO sensor range\/performance problem<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
Detection condition<\/span><\/div>\n<\/td>\n
\n
Determination conditions<\/div>\n<\/td>\n
\n
\u2022 Communication error between BARO sensor and PCM<\/div>\n
\u2022 Non-volatile memory error in BARO sensor<\/div>\n<\/td>\n<\/tr>\n
\n
Preconditions<\/div>\n<\/td>\n
\n
\u2022 Battery voltage: 10.5\u201416 V<\/span> *1<\/sup><\/div>\n
*1<\/sup>: Standard can be verified by displaying PIDs using M-MDS<\/div>\n<\/td>\n<\/tr>\n
\n
Malfunction determination period<\/div>\n<\/td>\n
\n
\u2022 5 s<\/span> period<\/div>\n<\/td>\n<\/tr>\n
\n
Drive cycle<\/div>\n<\/td>\n
\n
\u2022 1<\/div>\n<\/td>\n<\/tr>\n
\n
Self test type<\/div>\n<\/td>\n
\n
\u2022 CMDTC self test, KOEO self test, KOER self test<\/div>\n<\/td>\n<\/tr>\n
\n
Sensor used<\/div>\n<\/td>\n
\n
\u2022 BARO sensor (built-into PCM)<\/div>\n<\/td>\n<\/tr>\n
\n
Fail-safe function<\/span><\/div>\n<\/td>\n
\n
\u2022 Fixes the barometric pressure for the engine control at 101.32 kPa {1.0332 kgf\/cm2<\/sup>, 14.695 psi}<\/span>.<\/div>\n<\/td>\n<\/tr>\n
\n
Vehicle status when DTCs are output<\/span><\/div>\n<\/td>\n
\n
\u2022 Not applicable<\/div>\n<\/td>\n<\/tr>\n
\n
Possible cause<\/span><\/div>\n<\/td>\n
\n
\u2022 BARO sensor (built-into PCM) malfunction<\/div>\n
\u2022 PCM malfunction<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

System Wiring Diagram<\/p>\n

\u2022 Not applicable<\/div>\n



\n<\/a><\/p>\n

Function Explanation (DTC Detection Outline)<\/p>\n

\u2022 If there is a communication error between the BARO sensor and the CPU or a malfunction in the non-volatile memory inside the BARO sensor, the PCM stores a DTC.<\/div>\n



\n<\/a><\/p>\n

Repeatability Verification Procedure<\/p>\n

\u2022 Not applicable<\/div>\n



\n<\/a><\/p>\n

PID Item\/Simulation Item Used In Diagnosis<\/p>\n

\u2022 Not applicable<\/div>\n



\n<\/a><\/p>\n

Function Inspection Using M-MDS<\/p>\n

\n\n\n\n\n\n\n\n
\n

Step<\/p>\n<\/th>\n

\n

Inspection<\/p>\n<\/th>\n

\n

Results<\/p>\n<\/th>\n

\n

Action<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
1<\/div>\n<\/td>\n
\n
PURPOSE: VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY<\/div>\n
\u2022 Verify related Service Bulletins, on-line repair information, or Service Information availability.<\/div>\n
\u2022 Is any related Information available?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Perform repair or diagnosis according to the available information.<\/div>\n
\u2022 If the vehicle is not repaired, go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
2<\/div>\n<\/td>\n
\n
PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION<\/div>\n
\u2022 Record the freeze frame data\/snapshot data.<\/p>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 Recording can be facilitated using the screen capture function of the PC.<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n
\n
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Troubleshooting Diagnostic Procedure<\/p>\n

Intention of troubleshooting procedure<\/div>\n
\u2022 Step 1<\/div>\n
\n
\n
\u2015 Perform a unit inspection of the BARO sensor.<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Repair completion verification<\/div>\n
\n
\n
\u2015 Verify that the primary malfunction is resolved and there are no other malfunctions.<\/div>\n<\/dd>\n<\/dl>\n

\n\n\n\n\n\n\n\n\n\n\n
\n

Step<\/p>\n<\/th>\n

\n

Inspection<\/p>\n<\/th>\n

\n

Results<\/p>\n<\/th>\n

\n

Action<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
1<\/div>\n<\/td>\n
\n
PURPOSE: INSPECT BARO SENSOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable part. (See BAROMETRIC PRESSURE (BARO) SENSOR INSPECTION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See BAROMETRIC PRESSURE (BARO) SENSOR INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n
\u2022 Is the part normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n
(See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n
(See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 1<\/div>\n<\/td>\n
\n
PURPOSE: VERIFY THAT VEHICLE IS REPAIRED<\/div>\n
\u2022 Install\/connect the part removed\/disconnected during the troubleshooting procedure.<\/div>\n
\u2022 Clear the DTC recorded in the memory. (See CLEARING DTC<\/a>.)<\/div>\n
\u2022 Replicate the vehicle conditions at the time the DTC was detected using the following procedure.<\/div>\n
\n
\n
\u2015 Perform the KOEO or KOER self test. (See DTC INSPECTION<\/a>.)<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Perform the DTC inspection for the PCM. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Is the same Pending DTC present?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.<\/div>\n
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)]<\/a>.)<\/div>\n
If the CAN communication is normal, perform the diagnosis from Step 1.<\/div>\n
\u2022 If the malfunction recurs, replace the PCM, then go to the next step. (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 2<\/div>\n<\/td>\n
\n
PURPOSE: VERIFY IF OTHER DTCs DISPLAYED<\/div>\n
\u2022 Perform the DTC inspection. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Are any other DTCs displayed?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Repair the malfunctioning location according to the applicable DTC troubleshooting.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
DTC troubleshooting completed.<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

DTC P2226:00 [PCM (SKYACTIV-G)] SM2334416 id0102t4159300 Note \u2022 To determine the malfunctioning part, proceed with the diagnostics from “Function Inspection Using M-MDS”. Details On DTCs Description BARO sensor range\/performance problem Detection condition Determination conditions \u2022 Communication error between BARO sensor and PCM \u2022 Non-volatile memory error in BARO sensor Preconditions \u2022 Battery voltage: 10.5\u201416 V *1 *1: Standard can be verified by displaying PIDs using M-MDS Malfunction determination period \u2022 5 s period Drive cycle […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-8857","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8857","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=8857"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8857\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=8857"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}