{"id":8850,"date":"2022-03-10T20:30:42","date_gmt":"2022-03-10T20:30:42","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2334408\/"},"modified":"2022-03-10T20:30:42","modified_gmt":"2022-03-10T20:30:42","slug":"sm2334408","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2334408\/","title":{"rendered":"DTC P0201:00 [PCM (SKYACTIV-G)]"},"content":{"rendered":"
\n

DTC P0201:00 [PCM (SKYACTIV-G)]<\/h3>\n<\/div>\n

SM2334408<\/p>\n

<\/p>\n
\n
\n
\n

id0102t4147900<\/p>\n



\n<\/a><\/p>\n

Outline<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
\n

System malfunction location<\/p>\n<\/th>\n

\n

Fuel injector circuit\/open cylinder No.1<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
Detection condition<\/span><\/div>\n<\/td>\n
\n
\u2022 If the fuel injection verification signal is not input at 25 times<\/span> continuously even though the PCM drives the fuel injector No.1, the PCM determines that there is an open circuit in the fuel injector No.1 control circuit.<\/div>\n
Precondition<\/div>\n
\u2022 Battery voltage: 10.5 V or more<\/span><\/div>\n
\u2022 Fuel injection control: except during fuel cut<\/div>\n<\/td>\n<\/tr>\n
\n
Fail-safe<\/span><\/div>\n<\/td>\n
\n
\u2022 Not applicable<\/div>\n<\/td>\n<\/tr>\n
\n
Possible cause<\/span><\/div>\n<\/td>\n
\n
\u2022 Fuel injector No.1 connector or terminals malfunction<\/div>\n
\u2022 PCM connector or terminals malfunction<\/div>\n
\u2022 Short to ground in any of the following fuel injector No.1 circuits.<\/div>\n
\n
\n
\u2015 Control (+) circuit<\/div>\n
\u2015 Control (\u2212) circuit<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Short to power supply in fuel injector No.1 control (\u2212) circuit<\/div>\n
\u2022 Open circuit in any of the following fuel injector No.1 circuits.<\/div>\n
\n
\n
\u2015 Control (+) circuit<\/div>\n
\u2015 Control (\u2212) circuit<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Fuel injector No.1 malfunction<\/div>\n
\u2022 PCM malfunction<\/div>\n<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Diagnostic Procedure<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Step<\/p>\n<\/th>\n

\n

Inspection<\/p>\n<\/th>\n

\n

Results<\/p>\n<\/th>\n

\n

Action<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
1<\/div>\n<\/td>\n
\n
RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION<\/div>\n
\u2022 Record the freeze frame data\/snapshot data.<\/p>\n
\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 Recording can be facilitated using the screen capture function of the PC.<\/div>\n<\/dd>\n<\/dl>\n<\/div>\n<\/td>\n
\n
\u2014<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
2<\/div>\n<\/td>\n
\n
VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY<\/div>\n
\u2022 Verify related Service Bulletins, on-line repair information, or Service Information availability.<\/div>\n
\u2022 Is any related Information available?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Perform repair or diagnosis according to the available information.<\/div>\n
\u2022 If the vehicle is not repaired, go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
3<\/div>\n<\/td>\n
\n
INSPECT FUEL INJECTOR No.1 CONNECTOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable connector and terminal. (See CONNECTOR INSPECTION<\/a>.)<\/div>\n
\u2022 Are the connector and terminal normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
4<\/div>\n<\/td>\n
\n
INSPECT PCM CONNECTOR FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable connector and terminal. (See CONNECTOR INSPECTION<\/a>.)<\/div>\n
\u2022 Are the connector and terminal normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
5<\/div>\n<\/td>\n
\n
INSPECT FUEL INJECTOR No.1 CONTROL (+) CIRCUIT AND CONTROL (\u2212) CIRCUIT FOR SHORT TO GROUND<\/div>\n
\u2022 Inspect the applicable circuit for a short to ground. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
6<\/div>\n<\/td>\n
\n
INSPECT FUEL INJECTOR No.1 CONTROL (\u2212) CIRCUIT FOR SHORT TO POWER SUPPLY<\/div>\n
\u2022 Inspect the applicable circuit for a short to power supply. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
7<\/div>\n<\/td>\n
\n
INSPECT FUEL INJECTOR No.1 CONTROL (+) CIRCUIT AND CONTROL (\u2212) CIRCUIT FOR OPEN CIRCUIT<\/div>\n
\u2022 Inspect the applicable circuit for open circuit. (See CIRCUIT INSPECTION<\/a>.)<\/div>\n
\u2022 Is the circuit normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n<\/td>\n<\/tr>\n
\n
8<\/div>\n<\/td>\n
\n
INSPECT FUEL INJECTOR No.1 FOR MALFUNCTION<\/div>\n
\u2022 Inspect the applicable part. (See FUEL INJECTOR INSPECTION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See FUEL INJECTOR INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n
\u2022 Is the part normal?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Repair or replace the malfunctioning location and perform the repair completion verification.<\/div>\n
(See FUEL INJECTOR REMOVAL\/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n
(See FUEL INJECTOR REMOVAL\/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 1<\/div>\n<\/td>\n
\n
VERIFY THAT VEHICLE IS REPAIRED<\/div>\n
\u2022 Install\/connect the part removed\/disconnected during the troubleshooting procedure.<\/div>\n
\u2022 Clear the DTC recorded in the memory. (See CLEARING DTC<\/a>.)<\/div>\n
\u2022 Replicate the vehicle conditions at the time the DTC was detected using the following procedure.<\/div>\n
\n
\n
\u2015 Perform the KOEO or KOER self test. (See DTC INSPECTION<\/a>.)<\/div>\n<\/dd>\n<\/dl>\n
\u2022 Perform the DTC inspection for the PCM. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Is the same Pending DTC present?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.<\/div>\n
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)]<\/a>.)<\/div>\n
If the CAN communication is normal, perform the diagnosis from Step 1.<\/div>\n
\u2022 If the malfunction recurs, replace the PCM, then go to the next step. (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))]<\/a>.) (See PCM REMOVAL\/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]<\/a>.)<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
Go to the next step.<\/div>\n<\/td>\n<\/tr>\n
\n
Repair completion verification 2<\/div>\n<\/td>\n
\n
VERIFY IF OTHER DTCs DISPLAYED<\/div>\n
\u2022 Perform the DTC inspection. (See DTC INSPECTION<\/a>.)<\/div>\n
\u2022 Are any other DTCs displayed?<\/div>\n<\/td>\n
\n
Yes<\/div>\n<\/td>\n
\n
Repair the malfunctioning location according to the applicable DTC troubleshooting.<\/div>\n<\/td>\n<\/tr>\n
\n
No<\/div>\n<\/td>\n
\n
DTC troubleshooting completed.<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

DTC P0201:00 [PCM (SKYACTIV-G)] SM2334408 id0102t4147900 Outline System malfunction location Fuel injector circuit\/open cylinder No.1 Detection condition \u2022 If the fuel injection verification signal is not input at 25 times continuously even though the PCM drives the fuel injector No.1, the PCM determines that there is an open circuit in the fuel injector No.1 control circuit. Precondition \u2022 Battery voltage: 10.5 V or more \u2022 Fuel injection control: except during fuel cut Fail-safe \u2022 Not […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-8850","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8850","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=8850"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8850\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=8850"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}