{"id":8568,"date":"2022-03-10T20:30:40","date_gmt":"2022-03-10T20:30:40","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2333644\/"},"modified":"2022-03-10T20:30:40","modified_gmt":"2022-03-10T20:30:40","slug":"sm2333644","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2333644\/","title":{"rendered":"FRONT PILLAR INSTALLATION [PANEL REPLACEMENT]"},"content":{"rendered":"
\n

FRONT PILLAR INSTALLATION [PANEL REPLACEMENT]<\/h3>\n<\/div>\n

SM2333644<\/p>\n

<\/p>\n
\n
\n
\n

id098008744800<\/p>\n



\n<\/a><\/p>\n

Symbol Mark<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000549<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Installation Procedure<\/p>\n


<\/p>\n

<\/a><\/p>\n

4SD<\/p>\n

1.When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.<\/p>\n

\n

2.Drill holes for the plug welding before installing the new parts.<\/p>\n

\n

3.After temporarily installing new parts, make sure the related parts fit properly.<\/p>\n

\n

4.Apply the weld bond to the positions shown in the figure.<\/p>\n

\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\n
\u2022 For adhesive agent, use the following recommended agent or equivalent.<\/div>\n

\n\n\n\n\n\n\n
\n

Recommended agent<\/p>\n<\/th>\n

\n

Handleability time (minute)<\/p>\n<\/th>\n

\n

Hardening time (minute)<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
ThreeBond 2088E<\/div>\n<\/td>\n
\n
70<\/div>\n<\/td>\n
\n
\u2022 25\u00b0C {77\u00b0F}:1,440<\/div>\n
\u2022 120\u00b0C {248\u00b0F}:60<\/div>\n<\/td>\n<\/tr>\n
\n
3M Panel Bonding Adhesive PN 8115<\/div>\n<\/td>\n
\n
45<\/div>\n<\/td>\n
\n
\u2022 25\u00b0C {77\u00b0F}:1,440<\/div>\n
\u2022 60\u00b0C {140\u00b0F}:90<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/dd>\n<\/dl>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000488<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Plug welds in the 27 locations in area A shown in the figure and install the hinge pillar (inner).<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000489<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6.Plug welds in the 3 locations in area B shown in the figure and install the front pillar (inner).<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000490<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

7.Plug welds in the 14 locations in area C shown in the figure from the interior and install the front pillar upper reinforcement.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000491<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

8.Apply the weld bond to the position shown in the figure.<\/p>\n

\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\n
\u2022 For adhesive agent, use the following recommended agent or equivalent.<\/div>\n

\n\n\n\n\n\n\n
\n

Recommended agent<\/p>\n<\/th>\n

\n

Handleability time (minute)<\/p>\n<\/th>\n

\n

Hardening time (minute)<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
ThreeBond 2088E<\/div>\n<\/td>\n
\n
70<\/div>\n<\/td>\n
\n
\u2022 25\u00b0C {77\u00b0F}:1,440<\/div>\n
\u2022 120\u00b0C {248\u00b0F}:60<\/div>\n<\/td>\n<\/tr>\n
\n
3M Panel Bonding Adhesive PN 8115<\/div>\n<\/td>\n
\n
45<\/div>\n<\/td>\n
\n
\u2022 25\u00b0C {77\u00b0F}:1,440<\/div>\n
\u2022 60\u00b0C {140\u00b0F}:90<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/dd>\n<\/dl>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000497<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

9.Plug welds in the 20 locations in area D shown in the figure and install the hinge reinforcement.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000492<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

10.Plug welds in the 7 locations in area E shown in the figure.<\/p>\n

\n

11.Plug welds in the 4 locations in area F shown in the figure and install the front pillar reinforcement (upper).<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000493<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

12.Cut and join the 2 locations in area G shown in the figure.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000494<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

13.Plug welds in the 100 locations in area H shown in the figure and install the cabin side frame (outer) (front pillar (outer).<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000495<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

14.Apply the body sealer to the position shown in the figure.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000452<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

15.Plug welds in the 44 locations in area I shown in the figure.<\/p>\n

\n

16.Spot welds in the 36 locations in area J shown in the figure and install the roof panel.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000496<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/p>\n

<\/a><\/p>\n

5HB<\/p>\n

1.When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.<\/p>\n

\n

2.Drill holes for the plug welding before installing the new parts.<\/p>\n

\n

3.After temporarily installing new parts, make sure the related parts fit properly.<\/p>\n

\n

4.Apply the weld bond to the positions shown in the figure.<\/p>\n

\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\n
\u2022 For adhesive agent, use the following recommended agent or equivalent.<\/div>\n

\n\n\n\n\n\n\n
\n

Recommended agent<\/p>\n<\/th>\n

\n

Handleability time (minute)<\/p>\n<\/th>\n

\n

Hardening time (minute)<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
ThreeBond 2088E<\/div>\n<\/td>\n
\n
70<\/div>\n<\/td>\n
\n
\u2022 25\u00b0C {77\u00b0F}:1,440<\/div>\n
\u2022 120\u00b0C {248\u00b0F}:60<\/div>\n<\/td>\n<\/tr>\n
\n
3M Panel Bonding Adhesive PN 8115<\/div>\n<\/td>\n
\n
45<\/div>\n<\/td>\n
\n
\u2022 25\u00b0C {77\u00b0F}:1,440<\/div>\n
\u2022 60\u00b0C {140\u00b0F}:90<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/dd>\n<\/dl>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000488<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Plug welds in the 27 locations in area A shown in the figure and install the hinge pillar (inner).<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000489<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6.Plug welds in the 3 locations in area B shown in the figure and install the front pillar (inner).<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000490<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

7.Plug welds in the 14 locations in area C shown in the figure from the interior and install the front pillar upper reinforcement.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000491<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

8.Apply the weld bond to the position shown in the figure.<\/p>\n

\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\n
\u2022 For adhesive agent, use the following recommended agent or equivalent.<\/div>\n

\n\n\n\n\n\n\n
\n

Recommended agent<\/p>\n<\/th>\n

\n

Handleability time (minute)<\/p>\n<\/th>\n

\n

Hardening time (minute)<\/p>\n<\/th>\n<\/tr>\n<\/thead>\n

\n
ThreeBond 2088E<\/div>\n<\/td>\n
\n
70<\/div>\n<\/td>\n
\n
\u2022 25\u00b0C {77\u00b0F}:1,440<\/div>\n
\u2022 120\u00b0C {248\u00b0F}:60<\/div>\n<\/td>\n<\/tr>\n
\n
3M Panel Bonding Adhesive PN 8115<\/div>\n<\/td>\n
\n
45<\/div>\n<\/td>\n
\n
\u2022 25\u00b0C {77\u00b0F}:1,440<\/div>\n
\u2022 60\u00b0C {140\u00b0F}:90<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/dd>\n<\/dl>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000497<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

9.Plug welds in the 20 locations in area D shown in the figure and install the hinge reinforcement.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000492<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

10.Plug welds in the 7 locations in area E shown in the figure.<\/p>\n

\n

11.Plug welds in the 4 locations in area F shown in the figure and install the front pillar reinforcement (upper).<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000493<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

12.Cut and join the part to the 2 locations in area G shown in the figure.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000494<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

13.Plug welds in the 100 locations in area H shown in the figure and install the cabin side frame (outer) (front pillar (outer).<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000495<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

14.Apply the body sealer to the position shown in the figure.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000454<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

15.Plug welds in the 70 locations in area I shown in the figure.<\/p>\n

\n

16.Spot welds in the 38 locations in area J shown in the figure and install the roof panel.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzb00000552<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

FRONT PILLAR INSTALLATION [PANEL REPLACEMENT] SM2333644 id098008744800 Symbol Mark am3zzb00000549 Installation Procedure 4SD 1.When installing new parts, measure and adjust the body as necessary to conform with standard dimensions. 2.Drill holes for the plug welding before installing the new parts. 3.After temporarily installing new parts, make sure the related parts fit properly. 4.Apply the weld bond to the positions shown in the figure. Note \u2022 For adhesive agent, use the following recommended agent or equivalent. […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-8568","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8568","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=8568"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/8568\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=8568"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}