{"id":8474,"date":"2022-03-10T20:30:39","date_gmt":"2022-03-10T20:30:39","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/si121201\/"},"modified":"2022-03-10T20:30:39","modified_gmt":"2022-03-10T20:30:39","slug":"si121201","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/si121201\/","title":{"rendered":"09-20-02 – CENTER DISPLAY TURNS BLACK AND\/OR DTC U0264:00 STORED IN MEMORY WHEN REAR VIEW MONITORING SYSTEM IS ON"},"content":{"rendered":"
\n

09-20-02 – CENTER DISPLAY TURNS BLACK AND\/OR DTC U0264:00 STORED IN MEMORY WHEN REAR VIEW MONITORING SYSTEM IS ON<\/h3>\n<\/div>\n

SI121201<\/p>\n

<\/p>\n
\n

TSB NUMBER: 09-20-02<\/h4>\n

TSB ISSUE DATE<\/h4>\n

17\/01\/2020<\/p>\n

BULLETIN NOTES<\/h4>\n

APPLICABLE\/MODEL(S)\/VINS<\/strong>
\n2019 Mazda3 (Japan built) with VINS lower than JM1BP******109963 (produced before December 15, 2018)<\/p>\n

DESCRIPTION<\/h4>\n

On some vehicles. the center display may turn black and\/or DTC U0264:00 may be stored in memory when the rear view monitoring system is on after replacing the rear mount camera. This symptom occurs due to a communication error between the new rear mount camera and a specific old CMU software version. When replacing the rear mount camera with a new one, follow the Repair Procedure below to prevent this concern from occurring.
\n <\/p>\n

DTC U0264:00: Communication error with rear mount camera
\nNOTE:<\/strong>   For vehicles with a rear view monitor system with predicted vehicle path assist lines, this TSB is not applicable.<\/div>\n

\n 
\n <\/p>\n

REPAIR PROCEDURE<\/h4>\n

1. Verify concern.
\n2. Check the CMU software version<\/a>. Is the software version 7000C0A-NA01_10014 or later?<\/p>\n