{"id":10446,"date":"2022-03-10T20:30:56","date_gmt":"2022-03-10T20:30:56","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2566423\/"},"modified":"2022-03-10T20:30:56","modified_gmt":"2022-03-10T20:30:56","slug":"sm2566423","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2566423\/","title":{"rendered":"REAR WASHER HOSE REMOVAL\/INSTALLATION [(US)]"},"content":{"rendered":"
\n

REAR WASHER HOSE REMOVAL\/INSTALLATION [(US)]<\/h3>\n<\/div>\n

SM2566423<\/p>\n

<\/p>\n
\n
\n
\n

id0919008016x1<\/p>\n

Replacement Part<\/p>\n\n\n\n
\n
Inner liftgate gromet<\/div>\n
<\/div>\n
Quantity: 2<\/div>\n
<\/div>\n
Location of use: Liftgate<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n



\n<\/a><\/p>\n

Rear Washer Hose A<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the mudguard (RH). (See MUDGUARD REMOVAL\/INSTALLATION<\/a>.)<\/p>\n

\n

3.Remove the front fender insulator No.1. (RH). (See FRONT FENDER INSULATOR No.1 REMOVAL\/INSTALLATION<\/a>.)<\/p>\n

\n

4.Disconnect the rear washer hose A from the washer motor.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00027201<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Remove the rear washer hose A from the washer tank hook.<\/p>\n

\n

6.Pull out the windshield washer hose A from area A of the washer tank.<\/p>\n

\n

7.Remove the rear washer hose A from clips A.<\/p>\n

\n

8.Disconnect the rear washer hose A from the joint pipe A and remove it.<\/p>\n

\n

9.Install in the reverse order of removal.<\/p>\n

\n



\n<\/a><\/p>\n

Rear Washer Hose B<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the mudguard (RH). (See MUDGUARD REMOVAL\/INSTALLATION<\/a>.)<\/p>\n

\n

3.Disconnect the rear washer hose B from the joint pipe A.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00032131<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4.Remove the rear washer hose B from clips B.<\/p>\n

\n

5.Remove the following parts:<\/p>\n

\n

\n
(1)Passenger-side front scuff plate (with passenger-side knee air bag module) (See FRONT SCUFF PLATE REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Passenger-side front side trim (with passenger-side knee air bag module) (See FRONT SIDE TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Passenger-side decoration panel (with passenger-side knee air bag module) (See DECORATION PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)Glove compartment (See GLOVE COMPARTMENT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(5)Dashboard under cover (with passenger-side knee air bag module) (See DASHBOARD UNDER COVER REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(6)Passenger-side lower panel (with passenger-side knee air bag module) (See LOWER PANEL REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(7)Passenger-side A-pillar trim (See A-PILLAR TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

6.Pull out the grommet into the cabin side.<\/p>\n

\n

7.Disconnect rear washer hose B from the L-shaped joint pipe.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00032132<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

8.Install in the reverse order of removal.<\/p>\n

\n



\n<\/a><\/p>\n

Rear Washer Hose C<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the following parts:<\/p>\n

\n

\n
(1)Passenger-side front scuff plate (with passenger-side knee air bag module) (See FRONT SCUFF PLATE REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Passenger-side front side trim (with passenger-side knee air bag module) (See FRONT SIDE TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Passenger-side decoration panel (with passenger-side knee air bag module) (See DECORATION PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)Glove compartment (See GLOVE COMPARTMENT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(5)Dashboard under cover (with passenger-side knee air bag module) (See DASHBOARD UNDER COVER REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(6)Passenger-side lower panel (with passenger-side knee air bag module) (See LOWER PANEL REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(7)Passenger-side A-pillar trim (See A-PILLAR TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

3.Disconnect rear washer hose C from the L-shaped joint pipe.<\/p>\n

\n

4.Remove the rear washer hose C from the clip C.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00032133<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Disconnect the rear washer hose C from the joint pipe C.<\/p>\n

\n

6.Install in the reverse order of removal.<\/p>\n

\n



\n<\/a><\/p>\n

Rear Washer Hose D<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the following parts:<\/p>\n

\n

\n
(1)Front map light (See FRONT MAP LIGHT REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Sunvisor (See SUNVISOR REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Assist handle (See ASSIST HANDLE REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)A-pillar trim (See A-PILLAR TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(5)Front seat side cover (See FRONT SEAT SIDE COVER REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(6)Front seat belt lower anchor (See FRONT SEAT BELT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(7)B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(8)Trunk side upper trim (5HB) (See TRUNK SIDE UPPER TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(9)C-pillar trim (See C-PILLAR TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(10)Shift lever knob (MTX) (See SHIFT LEVER REMOVAL\/INSTALLATION [C66M-R]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(11)Selector lever knob (ATX) (See SELECTOR LEVER COMPONENT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(12)Console side panel (See CONSOLE SIDE PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(13)Shift panel (See SHIFT PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(14)Front console box (See FRONT CONSOLE BOX REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(15)Cup holder (See CUP HOLDER REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(16)Side wall (See SIDE WALL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(17)Rear console (See REAR CONSOLE REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(18)Rear console bracket No.1 (See REAR CONSOLE REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(19)Headliner (See HEADLINER REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

3.Remove the rear washer hose D.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00032146<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4.Install in the reverse order of removal.<\/p>\n

\n



\n<\/a><\/p>\n

Rear Washer Hose E<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the following parts:<\/p>\n

\n

\n
(1)Rear package tray (See REAR PACKAGE TRAY REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Trunk side upper trim (See TRUNK SIDE UPPER TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)C-pillar trim (RH) (See C-PILLAR TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

3.Partially peel back the headliner. (See HEADLINER REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/p>\n

\n

4.Disconnect the rear washer hose E from the joint pipe D.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00032147<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Remove the tape.<\/p>\n

\n

6.Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL\/INSTALLATION<\/a>.)<\/p>\n

\n

7.Partially peel the liftgate grommet in the direction of arrows shown in the figure, and remove the liftgate grommet from the inner liftgate grommet.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00027392<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

8.While pressing the tab of the inner liftgate grommet in the direction of arrow (1) shown in the figure, pull the inner liftgate grommet in the direction of arrow (2) and detach the tab of the inner liftgate grommet from the liftgate or body.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
ac9uuw00007296<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

9.Detach all the tabs of the inner liftgate grommet from the liftgate and remove the inner liftgate grommet.<\/p>\n

\n

10.Remove the tape. (See Rear Washer Hose E<\/a>.)<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
ac9uuw00008473<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

11.Disconnect rear washer hose E from the joint pipe E.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00032148<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

12.Remove rear washer hose F.<\/p>\n

\n

13.Install in the reverse order of removal.<\/p>\n

\n


<\/p>\n

<\/a><\/p>\n

Rear washer hose E installation note<\/p>\n

1.When installing rear washer hose E to the liftgate grommet, install it aligning to the position shown in the figure.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00032149<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

REAR WASHER HOSE REMOVAL\/INSTALLATION [(US)] SM2566423 id0919008016x1 Replacement Part Inner liftgate gromet Quantity: 2 Location of use: Liftgate Rear Washer Hose A 1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)].) 2.Remove the mudguard (RH). (See MUDGUARD REMOVAL\/INSTALLATION.) 3.Remove the front fender insulator No.1. (RH). (See FRONT FENDER INSULATOR No.1 REMOVAL\/INSTALLATION.) 4.Disconnect the rear washer hose A from the washer motor. am3zzw00027201 5.Remove the rear washer hose A from the washer tank hook. […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-10446","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/10446","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=10446"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/10446\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=10446"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}