{"id":10435,"date":"2022-03-10T20:30:56","date_gmt":"2022-03-10T20:30:56","guid":{"rendered":"https:\/\/www.hexorcism.com\/19BP\/sm2566412\/"},"modified":"2022-03-10T20:30:56","modified_gmt":"2022-03-10T20:30:56","slug":"sm2566412","status":"publish","type":"page","link":"https:\/\/www.hexorcism.com\/19BP\/sm2566412\/","title":{"rendered":"LOWER PANEL REMOVAL\/INSTALLATION [(US)]"},"content":{"rendered":"
\n

LOWER PANEL REMOVAL\/INSTALLATION [(US)]<\/h3>\n<\/div>\n

SM2566412<\/p>\n

<\/p>\n
\n
\n
\n

id0917008011x1<\/p>\n



\n<\/a><\/p>\n

Driver-side<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the following parts:<\/p>\n

\n

\n
(1)Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Driver-side front side trim (See FRONT SIDE TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Driver-side decoration panel (See DECORATION PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)Passenger-side decoration panel (See DECORATION PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(5)Hood release lever (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

3.Partially peel back the seaming welt.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021944<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4.Remove the bolt.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021945<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Remove the screw.<\/p>\n

\n

6.Move the driver-side lower panel in the order of arrows (1), (2), (3) and (4) shown in the figure, and remove the clips, hook, tab, and guide.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00029184<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

7.Disconnect the connectors.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021947<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

8.Remove the wiring harness clip.<\/p>\n

\n

9.Install in the reverse order of removal.<\/p>\n

\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 When replacing the driver-side lower panel, remove the cluster switch. (See CLUSTER SWITCH REMOVAL\/INSTALLATION<\/a>.)<\/div>\n<\/dd>\n<\/dl>\n



\n<\/a><\/p>\n

Center<\/p>\n

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)]<\/a>.)<\/p>\n

\n

2.Remove the following parts:<\/p>\n

\n

\n
(1)Shift lever knob (MTX) (See SHIFT LEVER REMOVAL\/INSTALLATION [C66M-R]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Selector lever knob (ATX) (See SELECTOR LEVER COMPONENT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Shift panel (See SHIFT PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)Front console box (See FRONT CONSOLE BOX REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(5)Cup holder (See CUP HOLDER REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(6)Side wall (See SIDE WALL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(7)Rear console (See REAR CONSOLE REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(8)Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(9)Driver-side front side trim (See FRONT SIDE TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(10)Driver-side decoration panel (See DECORATION PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(11)Passenger-side decoration panel (See DECORATION PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(12)Hood release lever (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(13)Driver-side lower panel (See LOWER PANEL REMOVAL\/INSTALLATION [(US)]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(14)Driver-side knee air bag module (See KNEE AIR BAG MODULE REMOVAL\/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM – MEXICO SPEC.]<\/a>.) (See KNEE AIR BAG MODULE REMOVAL\/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM – US\/CANADA SPEC.]<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

3.Remove the screws.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021948<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4.Move the center lower panel in the order of arrows (1) and (2), and remove it while detaching the clips.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021949<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

5.Disconnect the push button start connector.<\/p>\n

\n

6.Install in the reverse order of removal.<\/p>\n

\n

\n
\n
Note<\/div>\n<\/dd>\n
\n
\u2022 When replacing the center lower panel, remove the push button start. (See PUSH BUTTON START REMOVAL\/INSTALLATION<\/a>.)<\/div>\n<\/dd>\n<\/dl>\n



\n<\/a><\/p>\n

Passenger-side<\/p>\n


<\/p>\n

<\/a><\/p>\n

Removal<\/p>\n

1.Remove the following parts:<\/p>\n

\n

\n
(1)Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Passenger-side decoration panel (See DECORATION PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)Glove compartment (without passenger-side knee air bag module) (See GLOVE COMPARTMENT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(5)Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

2.Partially peel back the seaming welt.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021950<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

3.Remove the bolts.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021951<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4.Remove the screws.<\/p>\n

\n

5.Move the passenger-side lower panel in the order of arrows (1), (2), (3), and (4) shown in the figure, and remove it while detaching the clips, tab, hook, and guide.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021952<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/p>\n

<\/a><\/p>\n

Installation<\/p>\n

1.Install the clips, tab, hook, and guide while pressing the passenger-side lower panel in the order of arrows (1), (2), (3), and (4) shown in the figure.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00029185<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

2.Assemble the passenger-side lower panel to the dashboard and tighten the bolts and screws temporarily.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021951<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

3.Install the glove compartment. (without passenger-side knee air bag module) (See GLOVE COMPARTMENT REMOVAL\/INSTALLATION<\/a>.)<\/p>\n

\n

4.Measure the gap between the glove compartment and the passenger-side lower panel and verify that the measured value is within the nominal value. (without passenger-side knee air bag module)<\/p>\n

\n

\n
\n
\u2022 If not within the nominal value, move the passenger-side lower panel and adjust the installation position. (without passenger-side knee air bag module)<\/p>\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021954<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/dd>\n<\/dl>\n

5.Remove the glove compartment. (without passenger-side knee air bag module) (See GLOVE COMPARTMENT REMOVAL\/INSTALLATION<\/a>.)<\/p>\n

\n

6.Tighten the bolts and screws completely.<\/p>\n

\n\n\n\n
\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00024113<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

7.Install the following parts:<\/p>\n

\n

\n
(1)Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(2)Passenger-side decoration panel (See DECORATION PANEL REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(3)Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(4)Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n
\n
(5)Glove compartment (without passenger-side knee air bag module) (See GLOVE COMPARTMENT REMOVAL\/INSTALLATION<\/a>.)<\/dd>\n
<\/dd>\n<\/dl>\n

8.Install the seaming welt.<\/p>\n

\n\n\n\n
<\/td>\n\n\n\n\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
am3zzw00021950<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div>\n
<\/div>\n
<\/div>\n

<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

LOWER PANEL REMOVAL\/INSTALLATION [(US)] SM2566412 id0917008011x1 Driver-side 1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION\/CONNECTION [(US)].) 2.Remove the following parts: (1)Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL\/INSTALLATION.) (2)Driver-side front side trim (See FRONT SIDE TRIM REMOVAL\/INSTALLATION.) (3)Driver-side decoration panel (See DECORATION PANEL REMOVAL\/INSTALLATION.) (4)Passenger-side decoration panel (See DECORATION PANEL REMOVAL\/INSTALLATION.) (5)Hood release lever (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL\/INSTALLATION [(US)].) 3.Partially peel back the seaming welt. am3zzw00021944 4.Remove the […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-10435","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/10435","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/comments?post=10435"}],"version-history":[{"count":0,"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/pages\/10435\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hexorcism.com\/19BP\/wp-json\/wp\/v2\/media?parent=10435"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}