LIFTGATE LIGHT INSPECTION [(US)]
LIFTGATE LIGHT INSPECTION [(US)]
SM2566420
id0918008226x1
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the liftgate light from the liftgate. (See LIFTGATE LIGHT REMOVAL/INSTALLATION.)
3.Apply battery positive voltage and connect the ground to the liftgate light terminals as indicated in the table below and verify that each light turns on normally.
am3zzw00027218
|
|
B+ Terminal |
Ground Terminal |
Condition |
|
|---|---|---|---|
|
Back-up light |
Tail light |
||
|
A
|
E
|
turns ON
|
turns OFF
|
|
B
|
E
|
turns OFF
|
turns ON
|
-
• If each light does not turn on, replace the liftgate light. (See LIFTGATE LIGHT REMOVAL/INSTALLATION.)