Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PID/DATA MONITOR TABLE [LF CONTROL UNIT (US)]

PID/DATA MONITOR TABLE [LF CONTROL UNIT (US)]

SM2566390


id0902r91205ra

PID

Unit/Operation

Data contents

Module control terminal

DOOR_SW_ALL
Close/Open
• Close: All doors are closed.
• Open: Any door is open.
Q
DOOR_SW_D
Close/Open
• Close: Front door (driver’s side) is closed.
• Open: Front door (driver’s side) is open.
P, M
DOOR_SW_L/R
Close/Open
• Close: Rear door (LH) is closed.
• Open: Rear door (LH) is open.
P, M
DOOR_SW_P
Close/Open
• Close: Front door (passenger’s side) is closed.
• Open: Front door (passenger’s side) is open.
P, M
DOOR_SW_R/R
Close/Open
• Close: Rear door (RH) is closed.
• Open: Rear door (RH) is open.
P, M
IMMOBI_TMTR_STAT
Off/On
• Off: Communication with remote transmitter is not performed.
• On: Communication with remote transmitter is performed.
AE, AF
KEY_AUTH_TMTR_NUM
No Transmitter/TM No.1/TM No.2/TM No.3/TM No.4/TM No.5/TM No.6
• No Transmitter: No key authorization being implemented on remote transmitter.
• TM No.1: Remote transmitter 1 authorization is implemented.
• TM No.2: Remote transmitter 2 authorization is implemented.
• TM No.3: Remote transmitter 3 authorization is implemented.
• TM No.4: Remote transmitter 4 authorization is implemented.
• TM No.5: Remote transmitter 5 authorization is implemented.
• TM No.6: Remote transmitter 6 authorization is implemented.
Q
KEY_POS_V
Unknown/Internal(Front)/Internal(Rear)/External(FL)/External(FR)/External(Bum)
• Unknown: Remote transmitter position cannot be determined.
• Internal(Front): Remote transmitter determined to be at front of cabin.
• Internal(Rear): Remote transmitter determined to be at Rear of cabin.
• External(FL): Remote transmitter determined to be outside of vehicle front on left side.
• External(FR): Remote transmitter determined to be outside of vehicle front on right side.
• External(Bum): Remote transmitter determined to be outside of vehicle rear.
Q
LF_STAT_BUM
Off/On
• Off: LF communication with keyless antenna (exterior, bumper) is not performed.
• On: LF communication with keyless antenna (exterior, bumper) is performed.
Z, Y
LF_STAT_C
Note
• Displays in the M-MDS but it does not operate.
LF_STAT_F
Off/On
• Off: LF communication with keyless antenna (interior, front) is not performed.
• On: LF communication with keyless antenna (interior, front) is performed.
X, W
LF_STAT_L/F
Off/On
• Off: LF communication with front outer handle (LH) is not performed.
• On: LF communication with front outer handle (LH) is performed.
T, S
LF_STAT_R
Off/On
• Off: LF communication with keyless antenna (interior, center) is not performed.
• On: LF communication with keyless antenna (interior, center) is performed.
AB, AA
LF_STAT_R/F
Off/On
• Off: LF communication with front outer handle (RH) is not performed.
• On: LF communication with front outer handle (RH) is performed.
V, U
LF_STAT_TOTAL
Off/On
• Off: LF communication is not performed.
• On: LF communication is performed.
S, T, U, V, W, X, Y, Z, AA, AB
LFU_SIG_1
Trigger Off/Trigger On
• Trigger Off: Liftgate opener switch is off.
• Trigger On: Liftgate opener switch is on.
L
LFU_SIG_4
Press and Hold Finish/Unlock (Driver Side Touch Sensor)/Unlock (Passenger Side Touch Sensor)/Lock (Driver Side Touch Sensor)/Lock (Passenger Side Touch Sensor)/Trunk/Liftgate Open (Unlatch Switch)
• Press and Hold Finish: Operation of remote transmitter is completed.
• Unlock (Driver Side Touch Sensor): Detected that driver’s touch sensor was touched to unlock.
• Unlock (Passenger Side Touch Sensor): Detected that passenger’s touch sensor was touched to unlock.
• Lock (Driver Side Touch Sensor): Detected that driver’s touch sensor was touched to lock.
• Lock (Passenger Side Touch Sensor): Detected that Passenger’s touch sensor was touched to lock.
• Trunk/Liftgate Open (Unlatch Switch): Open operation authorization is completed by trunk lid/liftgate opener switch (exterior)
L
LFU_SIG_6
Press and Hold Finish/Unlock (Driver Side Touch Sensor)/Unlock (Passenger Side Touch Sensor)/Lock (Driver Side Touch Sensor)/Lock (Passenger Side Touch Sensor)/Trunk/Liftgate Open (Unlatch Switch)
• Press and Hold Finish: Operation of remote transmitter is completed.
• Unlock (Driver Side Touch Sensor): Unlock operation authorization is completed by driver’s touch sensor.
• Unlock (Passenger Side Touch Sensor): Unlock operation authorization is completed by passenger’s touch sensor.
• Lock (Driver Side Touch Sensor): Lock operation authorization is completed by driver’s touch sensor.
• Lock (Passenger Side Touch Sensor): Lock operation authorization is completed by passenger’s touch sensor.
• Trunk/Liftgate Open (Unlatch Switch): Open operation authorization is completed by trunk lid/liftgate opener switch (exterior).
L
LFU_SIG_7
ShortPress/LongPress
• ShortPress: Button of the remote transmitter is pressed.
• LongPress: Remote transmitter button is pressed and held.
L
LFU_SIG_8
No Transmitter /TM No.1/TM No.2/TM No.3/TM No.4/TM No.5/TM No.6
• No Transmitter: No remote transmitter requesting activation.
• TM No.1: Remote transmitter 1 is requesting activation.
• TM No.2: Remote transmitter 2 is requesting activation.
• TM No.3: Remote transmitter 3 is requesting activation.
• TM No.4: Remote transmitter 4 is requesting activation.
• TM No.5: Remote transmitter 5 is requesting activation.
• TM No.6: Remote transmitter 6 is requesting activation.
L
LFU_SIG_9
Press and Hold Finish/Unlock Request (Transmitter)/Unlock Request (Driver Side Touch Sensor)/Unlock Request (Passenger Side Touch Sensor)/Lock Request (Transmitter)/Lock Request (Driver Side Touch Sensor)/Lock Request (Passenger Side Touch Sensor)/Lock Request (Liftgate Lock Switch)/Trunk/Liftgate Open Request (Transmitter)/Trunk/Liftgate Open Request (Unlatch Switch)/Panic Request/Cancel Request
• Press and Hold Finish: Operation of remote transmitter is completed.
• Unlock Request (Transmitter): Unlock activation is requested due to remote transmitter operation.
• Unlock Request (Driver Side Touch Sensor): Unlock activation is requested due to driver’s touch sensor operation.
• Unlock Request (Passenger Side Touch Sensor): Unlock activation is requested due to passenger’s touch sensor operation.
• Lock Request (Transmitter): Lock activation is requested due to remote transmitter operation.
• Lock Request (Driver Side Touch Sensor): Lock activation is requested due to driver’s touch sensor operation.
• Lock Request (Passenger Side Touch Sensor): Lock activation is requested due to passenger’s touch sensor operation.
• Lock Request (Liftgate Lock Switch): Lock activation is requested due to trunk lid latch and lock actuator (4SD)/liftgate latch and lock actuator (5HB) operation.
• Trunk/Liftgate Open Request (Transmitter): Open activation is requested due to remote transmitter operation.
• Trunk/Liftgate Open Request (Unlatch Switch): Open activation is requested due to trunk lid (4SD)/liftgate latch switch (5HB) operation.
• Panic Request: Panic alerm is requested.
• Cancel: Unlock activation is requested due to remote transmitter operation when theft-deterrent system is operated.
L
LFU_SIG_10
NG/OK/Interrupt
• NG: Operation by transmitter is not authorized.
• OK: Operation by transmitter is authorized.
• Interrupt: Operation by transmitter is canceled.
L
TMTR_AREA_DETERMINE
FrontArea/RearArea
• FrontArea: Remote transmitter determined to be at front.
• RearArea: Remote transmitter determined to be at rear.
L
TMTR_BATT
TM BatteryNormal/TM BatteryLow
• TM BatteryNormal: Battery voltage of remote transmitter is normal.
• TM BatteryLow: Battery voltage of remote transmitter is depleted.
L
LFU_SIG_13
No Transmitter /TM No.1/TM No.2/TM No.3/TM No.4/TM No.5/TM No.6
• No Transmitter: No remote transmitter is requesting activation.
• TM No.1: Remote transmitter 1 activation request is completed.
• TM No.2: Remote transmitter 2 activation request is completed.
• TM No.3: Remote transmitter 3 activation request is completed.
• TM No.4: Remote transmitter 4 activation request is completed.
• TM No.5: Remote transmitter 5 activation request is completed.
• TM No.6: Remote transmitter 6 activation request is completed.
L
LLINK_SW_D
Unlock/Neutral/Lock/Failure
• Unlock: Front door lock−link switch (driver’s side) is in unlock.
• Neutral: Front door lock−link switch (driver’s side) is not in lock and unlock.
• Lock: Front door lock−link switch (driver’s side) is in lock.
• Failure: Front door lock−link switch (driver’s side) has a malfunction.
P, M
LLINK_SW_P
Unlock/Lock
• Unlock: Front door lock−link switch (passenger’s side) is in unlock.
• Lock: Front door lock−link switch (passenger’s side) is in lock.
P, M
POWER_MODE
OFF/ACC/ON/CRANK
• OFF: Body control module (BCM) controls ignition switch off (lock).
• ACC: Body control module (BCM) controls ignition switch ACC.
• ON: Body control module (BCM) controls ignition switch ON (engine off).
• CRANK: Body control module (BCM) controls cranking at ignition switch ON.
P, M
RF_DATA_1
Initial/Transmitter/RF Response
• Initial: RF signal is not received.
• Transmitter: Received RF signal was from transmitter operation.
• RF Response: Received RF signal was RF response to authorization transmission.
F, J
RF_DATA_2
Initial/No1/No2/No3/No4/No5/No6
Displays number of the remote transmitters programmed to the body control module (BCM)
F, J
T/LGT_LCK_SW
Off/On
• Off: Lock request signal is not received.
• On: Lock request signal is received.
E
T/LGT_SW
Close/Open
• Close: Trunk (4SD)/liftgate is closed.
• Open: Trunk (4SD)/liftgate (5HB) is open.
P, M
TIRE_TMTR_WU1_ID
Hex ID
This PID indicates registered wheel unit ID (wheel unit No.1)
Q
TIRE_TMTR_WU2_ID
Hex ID
This PID indicates registered wheel unit ID (wheel unit No.2)
Q
TIRE_TMTR_WU3_ID
Hex ID
This PID indicates registered wheel unit ID (wheel unit No.3)
Q
TIRE_TMTR_WU4_ID
Hex ID
This PID indicates registered wheel unit ID (wheel unit No.4)
Q
TMTR_INFO
Not operation/Lock/Unlock/Trunk/PLG/Panic/Cancel
• Not operation: Remote transmitter is not operated.
• Lock: Lock button of the remote transmitter is pressed.
• Unlock: Unlock button of the remote transmitter is pressed.
• Trunk: Trunk lid open button on the remote transmitter is pressed.
• PLG: —
• Panic: Panic button on the remote transmitter is pressed.
• Cancel: Unlock button of the remote transmitter is pressed when theft-deterrent system is operated.
F, J
TMTR_NUM
Displays registration number of the remote transmitter
Q
TMTR_STAT
FALSE/TRUE
• FALSE: LF control unit ID is not programmed.
• TRUE: LF control unit ID is programmed.
Q
TOUCH_SEN_LCK_L/F
Off/On
• Off: Front/rear door lock actuator motor is not operated to lock by touching the driver’s touch sensor.
• On: Front/rear door lock actuator motor is operated to lock by touching the driver’s touch sensor.
H
TOUCH_SEN_LCK_R/F
Off/On
• Off: Front/rear door lock actuator motor is not operated to lock by touching the passenger’s touch sensor.
• On: Front/rear door lock actuator motor is operated to lock by touching the passenger’s touch sensor.
H
TOUCH_SEN_ULCK_L/F
Off/On
• Off: Front/rear door lock actuator motor is not operated to unlock by touching the driver’s touch sensor.
• On: Front/rear door lock actuator motor is operated to unlock by touching the driver’s touch sensor.
H
TOUCH_SEN_ULCK_R/F
Off/On
• Off: Front/rear door lock actuator motor is not operated to unlock by touching the passenger’s touch sensor.
• On: Front/rear door lock actuator motor is operated to unlock by touching the passenger’s touch sensor.
H
TPMS_RF_SIG_1
Displays serial number from wheel unit.
F, J
TPMS_RF_SIG_2
Displays function code from wheel unit.
F, J
TPMS_RF_SIG_3
OK/LOW
• OK: Battery of wheel unit is normal.
• LOW: Battery of wheel unit is low.
F, J
TPMS_RF_SIG_4
Not Sync/Sync
• Not Sync: Wheel unit bit is not synchronized.
• Sync: Wheel unit bit is synchronized.
F, J
TPMS_RF_SIG_5
Displays emission angle from wheel unit.
F, J
TPMS_RF_SIG_6
Displays pressure from wheel unit.
F, J
TPMS_RF_SIG_7
Displays temperature from wheel unit.
F, J
TPMS_RF_SIG_8
Displays acceleration from wheel unit.
F, J
VPWR_LIMP_HOME
V
Displays voltage at LF control unit terminal D (power supply)
D
VPWR_ROOM
V
Displays voltage at LF control unit terminal B (power supply)
B
VSPD
Kph
Displays the vehicle speed signal from the DSC HU/CM.
P, M