id031900806200

Caution

• If the characteristic value of a new coupling component is not input to the PCM or the characteristic value is input incorrectly after replacing the coupling component, it could result in the following conditions:

― The system does not operate normally.

― A problem with durability of the coupling component occurs.

• After replacing the coupling component, read out the characteristic value of a new coupling component and write it to the PCM.

• Read out the characteristic value of the coupling component from the label or mark shown in the figure.

Note

• The Writing the characteristic value of coupling can be performed using the M-MDS.

am3zzw00035937

1.Connect the M-MDS to the DLC-2.

2.Perform the Writing the characteristic value of Coupling.

3.Perform the Reading the characteristic value of Coupling.