id0140u0889000

Note

• The clutch stroke sensor cannot be removed as a single unit. When replacing the clutch stroke sensor, replace it together with the clutch master cylinder as a single unit.

PID/DATA Monitor Inspection

1.Connect the M-MDS to the DLC‐2.

2.Switch the ignition ON (engine off).

3.Verify that the clutch pedal position (PID: CLTCH_PEDAL_POS) input from the clutch stroke sensor is within the standard when the clutch pedal is depressed. (See PID/DATA MONITOR INSPECTION.)

• If not within the specification, replace the clutch master cylinder. (See CLUTCH MASTER CYLINDER REMOVAL/INSTALLATION [C66M-R (US)].)