id0140u0216900

Voltage Inspection

Note

• The engine oil temperature sensor and engine oil pressure sensor cannot be removed as a single unit. When replacing the engine oil temperature sensor or engine oil pressure sensor, replace the engine oil temperature sensor/engine oil pressure sensor.

1.Switch the ignition ON (engine off).

2.Measure the voltage at the engine oil temperature sensor/engine oil pressure sensor terminal D.

ac5wzw00009773

• If the voltage is within the specification, go to the next step.

• If the voltage is not within the specification, replace the engine oil temperature sensor/engine oil pressure sensor. (See ENGINE OIL TEMPERATURE SENSOR/ENGINE OIL PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)

3.Connect the M-MDS to the DLC-2.

4.Start the engine.

5.Access the PID/DATA monitor item “OIL_PRES” using the M-MDS. (See PID/DATA MONITOR INSPECTION.)

6.Measure the voltage at the engine oil temperature sensor/engine oil pressure sensor terminal D when the OIL_PRES PID increases.

• If the voltage does not increase, replace the engine oil temperature sensor/engine oil pressure sensor. (See ENGINE OIL TEMPERATURE SENSOR/ENGINE OIL PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)

Specification (Reference)

am6zzw00008588