id0116u0900000

U.S.A. and CANADA

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the main silencer. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].)

3.Remove the insulator (rear). (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].)

4.Disconnect the connector and wiring harness clip shown in the figure.

am3zzw00029217

5.Disconnect the wiring harness clip as shown in the figure.

am3zzw00029218

6.Disconnect the evaporative hose as shown in the figure.

am3zzw00029228

7.Remove the pressure control valve installation bolt.

am3zzw00029220

8.Remove the charcoal canister (main) bracket installation nuts. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)

9.Disconnect the quick release connector shown in the figure while lowering the charcoal canister (main) component. (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)

am3zzw00029229

10.Temporarily install the charcoal canister (main) bracket.

11.Remove in the order indicated in the table.

12.Install in the reverse order of removal.

am3zzw00029222