OIL PRESSURE INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]
OIL PRESSURE INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]
SM2565657
id0111u0800300
1.Connect the M-MDS to the DLC-2.
2.Start the engine and warm it up.
3.Select the engine hydraulic pressure (PID: EOP) and the engine speed (PID: RPM) using the M-MDS data monitor function.
4.Verify the engine hydraulic pressure (PID: EOP) value while the engine maintains a constant speed.
-
• If not within the specification, determine the malfunctioning location referring to the following DTCs “Possible Cause” and repair or replace the applicable part.
-
― P0524:00 (Engine oil pressure too low)― P055F:00 (Engine oil pressure malfunction)
-
-
Note
-
• The oil pressure can vary with oil viscosity, temperature, and engine speed.
-
Oil pressure (reference value) [oil temperature: 80—90 °C {176—194 °F}, coolant temperature: 80—90 °C {176—194 °F}]
-
Lo: 135—165 kPa {1.38—1.68 kgf/cm 2, 19.6—23.9 psi} [1,500 rpm]Hi: 225—275 kPa {2.30—2.80 kgf/cm 2, 32.7—39.8 psi} [4,500 rpm]