id031400800700

Special Service Tool (SST)

49 D028 203 Support block

Replacement Part

1.Remove the drain plug and washer, and drain the oil. (See DIFFERENTIAL OIL REPLACEMENT.)

2.Install a new washer and the drain plug, and tighten.

am3zzw00032194

3.Remove the rear drive shaft. (See REAR DRIVE SHAFT REMOVAL/INSTALLATION.)

4.Remove the oil seal from the differential casing using a screwdriver.

am3zzw00031461

Caution

• Wrap the end of a screwdriver with cloth to prevent scratches to the inside of the differential casing.

5.Apply differential oil to the new oil seal lip.

6.Install the new oil seal to the differential carrier using the SST.

aaxjjw00026329

Note

• Install the oil seal at a straight angle.

7.Install the rear drive shaft. (See REAR DRIVE SHAFT REMOVAL/INSTALLATION.)

8.Remove the oil filler plug and washer, and then add the recommended differential oil. (See DIFFERENTIAL OIL REPLACEMENT.)

9.After adding the oil, perform an oil level inspection. (See DIFFERENTIAL OIL INSPECTION.)

10.Install a new washer and the oil filler plug, and tighten.