SIMULATION INSPECTION
SIMULATION INSPECTION
SM2337318
id990200000600
1.Connect the M-MDS to the DLC-2.
2.Switch the ignition ON (engine off or on).
3.Perform the vehicle identification.
4.Select the following items from the initialization screen of the M-MDS.
- (1)”Toolbox”
- (2)”Diagnosis”
- (3)”Data Logger”
5.Select the applicable module according to the module table. (See Module Table.)
6.Select the applicable simulation item.
-
Note
-
• The simulation function can only be implemented on items displaying the following icon.
aaxjjw00026461
7.Inspect the operation of each part according to the directions on the screen.
-
Note
-
• If the operation of the output part cannot be verified as a result of implementing the simulation function, an open/short circuit, sticking, or operation malfunction with the output part can be considered.
Module Table
|
M-MDS display name |
Applicable module |
|---|---|
|
ADD
|
Active driving display
|
|
ALH/AFS/ALV
|
Adaptive front lighting system (AFS) control module
|
|
Adaptive LED headlights control module
|
|
|
Auto leveling control module
|
|
|
BCM
|
Body control module (BCM)
|
|
CCU
|
Climate control unit
|
|
DASH_ESU
|
Dash-electrical supply unit
|
|
DCDC
|
DC-DC converter (M Hybrid)
|
|
DSC
|
DSC HU/CM
|
|
Electronically controlled brake unit
|
|
|
FSRL
|
Front side radar sensor (LH)
|
|
FSRR
|
Front side radar sensor (RH)
|
|
IC
|
Instrument cluster
|
|
LFU
|
LF control unit
|
|
PCM
|
PCM
|
|
RSRL
|
Rear side radar sensor (LH)
|
|
RSRR
|
Rear side radar sensor (RH)
|
|
SAS
|
SAS control module
|
|
TCM
|
TCM
|
* :A module with the simulation function differs depending on the specifications.