Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

INDICATOR UNIT INSPECTION

INDICATOR UNIT INSPECTION

SM2336707


id092200037600



Terminal Voltage Inspection

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the sensor cover.(See SENSOR COVER REMOVAL/INSTALLATION.)

3.Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

4.Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).

• If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s).
― If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the indicator unit. (See INDICATOR UNIT REMOVAL/INSTALLATION.)

Terminal Voltage Table (Reference)

ac5wzw00010265

Terminal

Signal name

Connected to

Measurement conditions

Voltage (V)

Inspection item(s)

A
Power supply (IG1)
IG1 relay
Ignition switch ON (engine off or on)
B+
• F47 15A fuse
• IG1 relay
• Related wiring harness
Ignition switch off or ACC
1.0 or less
B
C
IG_DCDC
IG1 relay
Ignition switch ON (engine off or on)
B+
• F47 15A fuse
• Ignition relay (IG1_STAB)
• Related wiring harness
Ignition switch off or ACC
1.0 or less
D
Reverse
Auto dimming rearview mirror
R position
B+
• Auto dimming rearview mirror
• Related wiring harness
E
F
Ground
Body ground
Under any condition
1.0 or less
• Body ground
• Related wiring harness
G
LIN_CBCM
BCM
Because this terminal is for communication, determination using terminal voltage inspection is not possible.
H
I
J
K
L
M
N
O
P