WASHER MOTOR INSPECTION
WASHER MOTOR INSPECTION
SM2336637
id091900805100
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Disconnect the rear washer hose from the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)
-
Warning
-
• Water sprayed on the battery and ground could cause electrocution. When performing the washer motor inspection, prepare a container to collect washer fluid and be careful not to spray washer fluid.
3.After connecting washer motor terminal B to the positive battery terminal, and terminal A to ground, verify that washer fluid sprays from the front side of the washer motor.
|
B+ terminal |
Ground terminal |
Operation |
|---|---|---|
|
B
|
A
|
Front
|
am3zzw00027226
|
-
• If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)
4.After connecting washer motor terminal A to the positive battery terminal, and washer motor terminal B to ground, verify that washer fluid sprays from the rear side of the washer motor.
|
B+ terminal |
Ground terminal |
Operation |
|---|---|---|
|
A
|
B
|
Rear
|
am3zzw00027227
|
-
• If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)