id091400006900

Continuity Inspection

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the Push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION.)

3.Verify that the continuity between the push button start terminals is as indicated in the table.

am3uuw00009904

am3zzw00027729

• If not as indicated in the table, replace the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION.)

LED Illumination Inspection

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the Push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION.)

3.Apply battery positive voltage and connect the ground to the push button start terminals and verify that the LED illuminates as indicated in the table.

am2zzw00008322

am2zzw00008323

• If the LED does not illuminate as indicated in the table, replace the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION.)