id091200004100

Note

• If the following operations have been performed, the initial setting is reset, and auto up/down operation are disabled. Therefore, performing the initial setting is necessary.

― Door-electrical supply unit is replaced.

― Inching operation is performed 10 times using power window main switch or power window subswitch.

― Door glass is removed.

1.Switch the ignition ON (engine on or off).

2.Press the power window main switch or power window subswitch to fully open the door glass.

3.Pull up the power window main switch or power window subswitch to the manual-up position to fully close the door glass and keep holding the switch up at the position for approx. 2 s.