ACTIVE DRIVING DISPLAY IS TOO BRIGHT OR TOO DARK [ACTIVE DRIVING DISPLAY]
ACTIVE DRIVING DISPLAY IS TOO BRIGHT OR TOO DARK [ACTIVE DRIVING DISPLAY]
SM2336296
id0903m7031600
Outline
|
Description
|
• Active driving display is too brigh.
• Active driving display is too dark.
|
|
Possible cause
|
• Active driving display malfunction
|
Diagnostic Procedure
|
Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
VERIFY ALL SYSTEM DTCs
• Perform the DTC inspection. (See DTC INSPECTION.)
• Are any DTCs displayed?
|
Yes
|
Repair the malfunctioning location according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
Repair completion verification
|
VERIFY THAT VEHICLE IS REPAIRED
• Install/connect the part removed/disconnected during the troubleshooting procedure.
• Has the malfunction symptom been eliminated?
|
Yes
|
Complete the symptom troubleshooting. (Explain contents of repair to customer)
|
|
No
|
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
If the CAN communication is normal, perform the diagnosis from Step 1.
• If the malfunction is not resolved, replace the active driving display. (See ACTIVE DRIVING DISPLAY REMOVAL/INSTALLATION [(US)].)
|