Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PID/DATA MONITOR TABLE [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER) (US)]

PID/DATA MONITOR TABLE [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER) (US)]

SM2335554


id0702k20114l0

—: Not applicable

PID/data monitor item

Unit/Operation

Data contents

Module control terminal

A/C_CTRL_STAT
Auto/OFF/AC
• Auto: A/C compressor control is in AUTO
• OFF: A/C compressor control is off
• AC: A/C compressor control is on
A/C_MODE_CTRL_STAT
Auto/Vent/B/L/HEAT/H/D/DEF
• Auto: Airflow mode setting is in AUTO
• Vent: Airflow mode setting is in VENT
• B/L: Airflow mode setting is in BI-LEVEL
• HEAT: Airflow mode setting is in HEAT
• H/D: Airflow mode setting is in DEF/HEAT
• DEF: Airflow mode setting is in DEFROSTER
A/C_SW
OFF/ON
• OFF: A/C switch is off
• ON: A/C switch is on
AMB_TEMP_INTERNAL
°C, °F
Displays the cabin temperature detected by the passenger compartment temperature sensor.
ATC_CTRL
Displays the air-conditioning control mode condition.
AUTO_SW
OFF/ON
• OFF: AUTO switch is off
• ON: AUTO switch is on
CLIMATE_STAT
Stopped/IP-ESU Indicater all ON Control
• Stopped: All of the indicators, display panel, and switch back lights on climate control unit are turned off
• IP-ESU Indicater all ON Control: All of the indicators, display panel, and switch back lights on climate control unit are turned on
CRANKING_STAT
Displays during engine cranking or other than engine cranking.
DEF_SW
OFF/ON
• OFF: DEFROSTER switch is off
• ON: DEFROSTER switch is on
DIM_CANCEL
Displays the dimmer cancel condition.
FAN_CTRL_STAT
FAN OFF/FAN AUTO/Manual 1/Manual 2/Manual 3/Manual 4/Manual 5/Manual 6/Manual 7
• FAN OFF: Blower motor is stopped
• FAN AUTO: Blower motor is operating in auto control
• Manual 1: Blower motor is operating in manual 1
• Manual 2: Blower motor is operating in manual 2
• Manual 3: Blower motor is operating in manual 3
• Manual 4: Blower motor is operating in manual 4
• Manual 5: Blower motor is operating in manual 5
• Manual 6: Blower motor is operating in manual 6
• Manual 7: Blower motor is operating in manual 7
FAN_DOWN_SW
OFF/ON
• OFF: Airflow volume control switch (-) is not pressed
• ON: Airflow volume control switch (-) is pressed
FAN_UP_SW
OFF/ON
• OFF: Airflow volume control switch (+) is not pressed
• ON: Airflow volume control switch (+) is pressed
GLOVE_BOX_LAMP_CTRL
OFF/ON
Note
• Displays in the M-MDS but it does not operate.
HZRD_CTRL_STAT
OFF/ON
• OFF: Hazard system is not operating
• ON: Hazard system is operating
HZRD_SW
OFF/ON
• OFF: Hazard warning switch is off
• ON: Hazard warning switch is on
ILLMI_MODE
Displays the illumination mode.
ILLMI_POWER
Displays the illumination power supply condition.
INTAKE_CTRL_STAT
Auto/REC/FRESH
• Auto: Air intake control setting is in AUTO
• REC: Air intake control setting is in REC
• FRESH: Air intake control setting is in FRESH
MODE_SW
OFF/ON
• OFF: MODE switch is off
• ON: MODE switch is on
ON_OFF_SW
OFF/ON
• OFF: POWER switch is off
• ON: POWER switch is on
PNL_BRIGHT_LVL
Displays the panel light brightness.
POWER_STAT
Displays the ignition switch condition.
R_DEF_CTRL_STAT
OFF/ON
• OFF: Rear window defogger switch indicator is turned off (rear window defogger stopped)
• ON: Rear window defogger switch indicator is turned on (rear window defogger operating)
R_DEF_SW
OFF/ON
• OFF: Rear window defogger switch is off
• ON: Rear window defogger switch is on
REC_SW
OFF/ON
• OFF: RECIRCULATE/FRESH switch is off
• ON: RECIRCULATE/FRESH switch is on
ROOM_FUSE_STAT
Displays the F27 25 A fuse condition.
SEAT_HEAT_STAT_L
OFF/Lo/Mid/Hi/AUTO
• OFF: Seat warmer switch (LH) indicator is turned off
• Lo: Seat warmer switch (LH) indicator is turned on at temperature level 1
• Mid: Seat warmer switch (LH) indicator is turned on at temperature level 2
• Hi: Seat warmer switch (LH) indicator is turned on at temperature level 3
• AUTO: —
SEAT_HEAT_STAT_R
OFF/Lo/Mid/Hi/AUTO
• OFF: Seat warmer switch (RH) indicator is turned off
• Lo: Seat warmer switch (RH) indicator is turned on at temperature level 1
• Mid: Seat warmer switch (RH) indicator is turned on at temperature level 2
• Hi: Seat warmer switch (RH) indicator is turned on at temperature level 3
• AUTO: —
SEAT_HEAT_SW_L
OFF/ON
• OFF: Seat warmer switch (LH) is off
• ON: Seat warmer switch (LH) is on
SEAT_HEAT_SW_R
OFF/ON
• OFF: Seat warmer switch (RH) is off
• ON: Seat warmer switch (RH) is on
SET_TEMP_UNIT
Displays the display setting (Fahrenheit/Celsius) for the set temperature.
STR_HEAT_STAT
OFF/Lo
• OFF: Steering warmer switch indicator is turned off
• Lo: Steering warmer switch indicator is turned on
STR_HEAT_SW
OFF/ON
• OFF: Heated steering wheel switch is off
• ON: Heated steering wheel switch is on
SYNC_SW
OFF/ON
• OFF: SYNC switch is off
• ON: SYNC switch is on
TEMP_DOWN_SW_L
OFF/ON
• OFF: Temperature control dial (LH) is not rotated left
• ON: Temperature control dial (LH) is rotated left
TEMP_DOWN_SW_R
OFF/ON
• OFF: Temperature control dial (RH) is not rotated left
• ON: Temperature control dial (RH) is rotated left
TEMP_UP_SW_L
OFF/ON
• OFF: Temperature control dial (LH) is not rotated right
• ON: Temperature control dial (LH) is rotated right
TEMP_UP_SW_R
OFF/ON
• OFF: Temperature control dial (RH) is not rotated right
• ON: Temperature control dial (RH) is rotated right
VOLT_5V
V
Displays the voltage for the 5 V power supply of the circuit in the climate control unit.
VPWR
V
Displays the power supply voltage (B+) to the climate control unit.