Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HYDRAULIC VARIABLE VALVE TIMING ACTUATOR INSPECTION

HYDRAULIC VARIABLE VALVE TIMING ACTUATOR INSPECTION

SM2841595


id011000126800

Caution
• Do not disassemble the hydraulic variable valve timing actuator because it is a precision unit.

1.Verify that the notch of the rotor and projection of the cover on the hydraulic variable valve timing actuator are aligned and fitted. (Hydraulic variable valve timing actuator (type A))

bpe2ue00000012
• If the notch of the rotor and projection of the cover are not aligned, rotate the crankshaft in the direction the engine rotates two turns and verify that they are aligned.
― If the notch of the rotor and projection of the cover are still not aligned, replace the hydraulic variable valve timing actuator.
• If, when turning the crankshaft, there is a slapping noise from the hydraulic variable valve timing actuator each time before the cam reaches its maximum lift, it means that the actuator is not secured. Replace the hydraulic variable valve timing actuator.

2.Verify that the alignment mark of the rotor and alignment mark of the cover on the hydraulic variable valve timing actuator are aligned and fitted. (Hydraulic variable valve timing actuator (type B))

bpe5ue00000054
• If the alignment mark of the rotor and alignment mark of the cover are not aligned, rotate the crankshaft in the direction the engine rotates two turns and verify that they are aligned.
― If the alignment mark of the rotor and alignment mark of the cover are still not aligned, replace the hydraulic variable valve timing actuator.
• If, when turning the crankshaft, there is a slapping noise from the hydraulic variable valve timing actuator each time before the cam reaches its maximum lift, it means that the actuator is not secured. Replace the hydraulic variable valve timing actuator.