REAR DOOR LATCH AND LOCK ACTUATOR INSPECTION [(US)]
REAR DOOR LATCH AND LOCK ACTUATOR INSPECTION [(US)]
SM2566406
id0914005118x1
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the rear door latch and lock actuator. (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)
3.Apply battery positive voltage and connect the ground to the rear door lock and actuator terminals as indicated in the table below and verify the operation condition.
am3zzw00027209
|
|
Rear door lock actuator |
B+ terminal |
Ground terminal |
Operation |
|---|---|---|---|
|
Driver’s side
|
G
|
E
|
Unlock
|
|
E
|
G
|
Lock
|
|
|
Passenger’s side
|
E
|
C
|
Unlock
|
|
C
|
E
|
Lock
|
-
• If not as indicated in the table, replace the rear door latch and lock actuator. (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)
4.Verify that the continuity is as indicated in the table.
am3zzw00024783
|
-
• If not as indicated in the table, replace the rear door latch and lock actuator. (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)
-
Note
-
• When inspecting the latch side of the rear door latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.
ac5jjw00000020
5.When the door lock-link switch cable is pulled or pressed in, verify that the continuity is as indicated in the table.
am3zzw00027450
|
-
• If not as indicated in the table, replace the rear door latch and lock actuator. (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)