SHIFT PANEL REMOVAL/INSTALLATION
SHIFT PANEL REMOVAL/INSTALLATION
SM2336563
id091700898400
ATX
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the selector lever knob. (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)
3.Move the shift panel in the order of arrows (1), (2), and (3) shown in the figure, and detach the clips.
|
4.Disconnect the connector.
|
5.Disconnect the connectors.
|
6.Remove the shift panel.
7.Install in the reverse order of removal.
-
Note
-
• When replacing the shift panel, remove the following parts:
-
• Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION.)• Commander switch (See COMMANDER SWITCH REMOVAL/INSTALLATION.)• Electric parking brake switch (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)• Drive selection switch (with drive selection switch) (See DRIVE SELECTION SWITCH REMOVAL/INSTALLATION)
-
MTX
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the shift lever knob. (See SHIFT LEVER REMOVAL/INSTALLATION [C66M-R].)
3.Move the shift panel in the order of arrows (1), (2), and (3) shown in the figure, and detach the clips.
|
4.Disconnect the connectors.
|
5.Remove the shift panel.
6.Install in the reverse order of removal.
-
Note
-
• When replacing the shift panel, remove the following parts:
-
― Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION.)― Commander switch (See COMMANDER SWITCH REMOVAL/INSTALLATION.)― Electric parking brake switch (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
-