id0917008985x1

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the following parts:

(1)Shift lever knob (MTX) (See SHIFT LEVER REMOVAL/INSTALLATION [C66M-R].)

(2)Selector lever knob (ATX) (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)

(3)Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(4)Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(5)Cup holder (See CUP HOLDER REMOVAL/INSTALLATION.)

(6)Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

3.Move the console panel in the order of arrows (1), (2), (3), and (4) shown in the figure, and detach the clips.

am3zzw00021905

4.Move the console-up in the direction of the arrow shown in the figure and remove it while detaching the hooks and guides.

am3zzw00029299

5.Disconnect the connectors.

am3zzw00024072

6.Remove the cushion tape.

am3zzw00021906

7.Remove the bolts.

am3zzw00021907

8.Remove the bolts.

am3zzw00021908

9.Move the rear console in the direction of the arrow shown in the figure, detach the clips and guides from the center lower panel, and remove the rear console.

am3zzw00021909

10.When removing the rear console bracket No.1, perform the following procedure:

(1)Remove the wiring harness clips.

am3zzw00027686

(2)Remove the nuts.

(3)Remove the rear console bracket No.1.

11.Install in the reverse order of removal.