FUEL PUMP CONTROL MODULE INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]
FUEL PUMP CONTROL MODULE INSPECTION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]
SM2565718
id0114u0175100
1.Connect the M-MDS to the DLC-2.
2.Switch the ignition ON (engine off).
3.Perform the KOEO self-test. (See DTC INSPECTION.)
4.Verify that a fuel pump control module related DTC is detected. (See DTC INSPECTION.)
-
• If DTCs are detected, repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [PCM (SKYACTIV-G (US))].)• If a DTC is not detected, go to the next step.
5.Inspect the following:
-
• Fuel pump control module damage• Fuel pump control module connector damage or corrosion
-
― If there is any malfunction, repair or replace the malfunctioning part.
-