Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

COUPLING COMPONENT CALIBRATION DATA WRITING

COUPLING COMPONENT CALIBRATION DATA WRITING

SM2565945


id031900806200

Caution
• If the characteristic value of a new coupling component is not input to the PCM or the characteristic value is input incorrectly after replacing the coupling component, it could result in the following conditions:
― The system does not operate normally.
― A problem with durability of the coupling component occurs.
• After replacing the coupling component, read out the characteristic value of a new coupling component and write it to the PCM.
• Read out the characteristic value of the coupling component from the label or mark shown in the figure.
Note
• The Writing the characteristic value of coupling can be performed using the M-MDS.
am3zzw00035937

1.Connect the M-MDS to the DLC-2.

2.Perform the Writing the characteristic value of Coupling.

3.Perform the Reading the characteristic value of Coupling.