MAP IS NOT DISPLAYED
MAP IS NOT DISPLAYED
SM2337311
id160300001500
Outline
|
Possible cause
|
• SD card malfunction
• USB port/SD card slot hub malfunction
• Connectivity master unit (CMU) malfunction
|
Diagnostic Procedure
|
Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
VERIFY ALL SYSTEM DTCs
• Perform the DTC inspection. (Refer to the [DTC INSPECTION] in the workshop manual)
• Are any DTCs displayed?
|
Yes
|
Repair the malfunctioning location according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
2
|
VISUALLY INSPECT SD CARD
• Visually inspect the SD card for looseness or damage.
• Is the SD card normal?
|
Yes
|
Go to the next step.
|
|
No
|
System is normal. (explain to the customer that there is a malfunction in SD card.)
|
||
|
3
|
VERIFY IF SD CARD IS VALID
• Perform diagnostic assist function “Storage Diagnostic Test” MAP Areas. (See DIAGNOSTIC ASSIST FUNCTION [CONNECTIVITY MASTER UNIT (US)].)
• Is the SD card normal?
|
Yes
|
Go to the next step.
|
|
No
|
Explain to the customer that the SD card is not valid.
|
||
|
4
|
INSPECT USB PORT/SD CARD SLOT HUB FOR MALFUNCTION
• Inspect the applicable part. (Refer to the [USB PORT/SD CARD SLOT HUB INSPECTION] in the workshop manual)
• Is the part normal?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace the malfunctioning location and perform the repair completion verification.
(Refer to the [USB PORT/SD CARD SLOT HUB REMOVAL/INSTALLATION] in the workshop manual)
|
||
|
Repair completion verification
|
VERIFY THAT VEHICLE IS REPAIRED
• Install/connect the part removed/disconnected during the troubleshooting procedure.
• Has the malfunction symptom been eliminated?
|
Yes
|
Complete the symptom troubleshooting. (Explain contents of repair to customer)
|
|
No
|
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
(Refer to the [CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW] in the workshop manual)
If the CAN communication is normal, perform the diagnosis from Step 1.
• If the malfunction is not resolved, replace the connectivity master unit (CMU). (Refer to the [CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION] in the workshop manual)
|