BATTERY REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]

SM2565815

id0117008005v0

Battery Removal/Installation

1.Remove in the order indicated in the table.

2.Install in the reverse order of removal.

am3zzw00033370

1	Negative battery terminal (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].) (See Negative battery terminal connection note.)
2	Positive battery terminal (See Positive battery terminal connection note.)
3	Battery clamp
4	Battery and battery box (See Battery and battery box removal note.)
5	Battery box (See Battery box installation note.)
6	Wiring harness (See Wiring harness disconnection note.)
7	PCM connector (See PCM connector connection note.)
8	Bracket
9	Battery tray and PCM component (See Battery tray and PCM component installation note.)
10	PCM (See PCM REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)

Battery and battery box removal note

Caution

• When removing the battery, do not place the battery on the PCM connector or hit it with the battery. Otherwise, the PCM or PCM connector could be damaged.

Wiring harness disconnection note

1.Remove the following parts as a single unit: (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)

• Air hose

• Air cleaner cover

• Air cleaner element

• Air cleaner case

• Fresh-air duct

• Resonance chamber

2.Disconnect the wiring harness.

Battery tray and PCM component installation note

1.Tighten the battery tray installation bolts in the order shown in the figure.

am3zzw00033371

PCM connector connection note

Caution

• Do not touch the PCM connector terminal. The terminal is extremely thin and can be damaged by touching it.

• If the PCM connector is inserted at an angle and the lever is moved, the connector could be damaged. Verify that the PCM connector is inserted straight.