id091700800900

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the following parts:

(1)Shift lever knob (MTX) (See SHIFT LEVER REMOVAL/INSTALLATION [C66M-R].)

(2)Selector lever knob (ATX) (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)

(3)Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(4)Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(5)Cup holder (See CUP HOLDER REMOVAL/INSTALLATION.)

(6)Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(7)Rear console (See REAR CONSOLE REMOVAL/INSTALLATION [(US)].)

(8)Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(9)Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(10)Driver-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(11)Passenger-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(12)Hood release lever (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL/INSTALLATION [(US)].)

(13)Driver-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION [(US)].)

(14)Driver-side knee air bag module (See KNEE AIR BAG MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM – MEXICO SPEC.].) (See KNEE AIR BAG MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM – US/CANADA SPEC.].)

(15)Center lower panel (See LOWER PANEL REMOVAL/INSTALLATION [(US)].)

(16)Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION.)

(17)Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

3.Remove the screws.

am3zzw00021797

4.Disconnect the connectors.

am3zzw00021798

5.Remove the meter hood from the instrument cluster.

am3zzw00021799

6.Install in the reverse order of removal.