Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

POOR FUEL ECONOMY [SKYACTIV-G]

POOR FUEL ECONOMY [SKYACTIV-G]

SM2334615


id0103s4890100

Troubleshooting item

Poor fuel economy

Description
• The fuel consumption is high compared to the customer’s expectations or the previous fuel consumption.
Possible cause
Note
• The perceived poor fuel economy condition has two causes; the vehicle conditions and how the driver uses the vehicle. Especially, it relies heavily on how the driver uses the vehicle.
• Engine oil malfunction
― Improper engine oil level
― Engine oil contamination
― Improper engine oil viscosity
• Improper engine compression
• Ignition system malfunction
• Improper engine coolant level
• Improper tire air pressure
• Improper tires, wheels (large size, irregular size)
• Clutch slippage (MTX)
• Improper ATF level (ATX)
• Brake dragging
• Engine operation time is longer than traveled distance
― Vehicle is driven in congested traffic frequently
― Vehicle left idling for long periods
• Amount of fuel injection increases
― Vehicle is carrying excess items (luggage)
― Frequent acceleration/deceleration
― Frequently driving uphill
― Travel distances are short (engine does not warm up)

Diagnostic Procedure

Step

Inspection

Results

Action

1
VERIFY ALL SYSTEM DTCs
Note
• Display the DTCs of all the modules using the M-MDS.
• Perform the DTC inspection. (See DTC INSPECTION.)
• Are any DTCs displayed?
Yes
Repair the malfunctioning location according to the applicable DTC troubleshooting.
No
Go to the next step.
2
VERIFY IF MALFUNCTION SYMPTOM IS CAUSED BY OTHER MALFUNCTION
Note
• There are few malfunction affecting only the fuel economy, therefore it is necessary to verify that other malfunctions are not appearing as symptoms.
• Verify the vehicle engine condition.
• Can malfunction symptoms other than “POOR FUEL ECONOMY” be verified?
Yes
Go to the applicable symptom troubleshooting.
No
Go to the next step.
3
INSPECT ENGINE AND VEHICLE CONDITIONS
Note
• Because the vehicle malfunction cannot be verified, it is necessary to inspect the items which may be adversely affecting fuel consumption.
• Perform the following inspections:
― Engine oil contamination
― Tire air pressure
― Clutch slippage (MTX)
― Brake dragging
• Is there any malfunction?
Yes
Repair or adjust the malfunctioning location and explain the repair contents to the customer based on the inspection result.
No
Go to the next step.
4
VERIFY VEHICLE USE CONDITION
Note
• It is necessary to ask the customer about how they use the vehicle because there is no problem with the inspection items from Step 1 to 3.
• Verify how the customer uses the vehicle with regard to the following applicable items, and provide the customer some pertinent advice:
― Tires, wheels (large size)
― Engine operation time is longer than traveled distance
• Vehicle is driven in congested traffic frequently
• Vehicle left idling for long periods
― Amount of fuel injection increases
• Vehicle is carrying excess items (luggage)
• Frequent acceleration/deceleration
• Frequently driving uphill
• Travel distances are short (engine does not warm up)
― Use of unrecommended engine oil (leads to inappropriate oil viscosity)
Symptom troubleshooting is completed.