Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DETERMINING OPEN CIRCUIT LOCATION (CAN-BUS No.8) [(US)]

DETERMINING OPEN CIRCUIT LOCATION (CAN-BUS No.8) [(US)]

SM2566471


id1002x1004500

Caution
• Perform the following malfunction diagnosis only when it is diagnosed with a open circuit by CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)].)
• If the malfunctioning part is detected in the communication line, before disconnecting the related connector for inspection, press the connector in the connection direction to verify that there is no looseness or disconnection.
• When disconnecting the connector, verify that there is no damage, deformation, or corrosion of the connector terminals.

1.Verify the CAN system-related module DTCs and the module displayed in red or blue on the M-MDS screen.

2.Apply the communication error DTC and the module displayed in red or blue to the DTC output pattern and malfunctioning location, and select the possible cause for the diagnostic result and the reference for the inspection item. (See DTC Output Pattern And Malfunctioning Location)

Note
• The open circuit location can be determined by the DTC indicated in the DTC output pattern and malfunctioning location chart. DTCs not listed in the chart are not used for the determination of the open circuit location. (See DTC Output Pattern And Malfunctioning Location.)
• The module may be displayed in red or blue on the M-MDS screen even if there is no malfunction depending on the vehicle specification.

3.Inspect the possible cause and inspection item of the applicable malfunctioning part.



DTC Output Pattern And Malfunctioning Location

Cross (×): Communication error-related DTC

M-MDS display

DTC

DTC output pattern and malfunctioning location

DTC output module

PCM
U0101:00
U0121:00
U0131:00
U0140:00
×
U0151:00
U0155:00
U0164:00
U2121:00
U212E:00
U2131:00
U2133:00
Electric parking brake control module / DSC HU/CM
U0100:00
U0101:00
U0131:00
U0140:00
×
U0151:00
U0155:00
U0164:00
U2121:00
U212E:00
U2131:00
EPS control module
U0100:00
U0121:00
U0140:00
×
U2121:00
Vehicle control module (VCM)
U0100:00
U0101:00
U0121:00
U0126:00
U0131:00
U0140:00
×
U0151:00
U0155:00
U0156:00
U0164:00
U2120:00
U2122:00
U2123:00
U2125:00
U2126:00
U212E:00
U2131:00
U2132:00
U2133:00
U2139:00
U213A:00
Body control module (BCM)
U0100:00
U0101:00
U0115:00
U0121:00
U0121:87
U0126:00
U0131:00
U0151:00
U0155:00
U0156:00
U0158:00
U0164:00
U0182:00
U2121:49
U212A:00
U212C:00
U212D:00
U212E:00
U2131:00
U2133:00
U213A:00
U213B:00
Connectivity master unit (CMU)
U0140:00
×
Telematics communication unit
U0140:00
 
U0151:00
 
U0164:00
 
U213C:00
Adaptive front lighting system (AFS) control module
U0122:87
U0126:87
U212A:87
U212B:87
×
U212D:87
Dash-electrical supply unit
U0100:00
U0101:00
U0121:00
U0151:00
U212B:00
×
U212E:00
U2131:00
U2133:00
U213A:00
SAS control module
U0140:00
×
U0155:00
U0156:00
TCM
U0100:00
U0121:00
U0131:00
U0140:00
×
U0155:00
U212C:00
M-MDS display module
Module displayed in red or blue
Telematics communication unit
×
Diagnostic result
Possible cause and inspection item



A


Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion
• Telematics communication unit power supply voltage or body ground malfunction
• Body control module (BCM) power supply voltage or body ground malfunction
• Open circuit in wiring harness between telematics communication unit and body control module (BCM)
• Telematics communication unit malfunction
• Body control module (BCM) malfunction


System wiring diagram

am3zzw00027583


Inspection item

• Telematics communication unit power supply voltage-related wiring harness and fuse
• Telematics communication unit body ground related wiring harness
• Telematics communication unit connector
• Body control module (BCM) power supply voltage-related wiring harness and fuse
• Body control module (BCM) body ground related wiring harness
• Body control module (BCM) connector
• Wiring harness between telematics communication unit terminal 1Q and body control module (BCM) terminal 3V
• Wiring harness between telematics communication unit terminal 1S and body control module (BCM) terminal 3U
• Body control module (BCM)
• Telematics communication unit