DETERMINING OPEN CIRCUIT LOCATION (CAN-BUS No.1) [(US)]

SM2566443

id1002x1001700

Caution

• Perform the following malfunction diagnosis only when it is diagnosed with a open circuit by CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)].)

• If the malfunctioning part is detected in the communication line, before disconnecting the related connector for inspection, press the connector in the connection direction to verify that there is no looseness or disconnection.

• When disconnecting the connector, verify that there is no damage, deformation, or corrosion of the connector terminals.

1.Verify the CAN system-related module DTCs and the module displayed in red or blue on the M-MDS screen.

2.Apply the communication error DTC and the module displayed in red or blue to the DTC output pattern and malfunctioning location, and select the possible cause for the diagnostic result and the reference for the inspection item. (See DTC Output Pattern And Malfunctioning Location)

Note

• The open circuit location can be determined by the DTC indicated in the DTC output pattern and malfunctioning location chart. DTCs not listed in the chart are not used for the determination of the open circuit location. (See DTC Output Pattern And Malfunctioning Location.)

• The module may be displayed in red or blue on the M-MDS screen even if there is no malfunction depending on the vehicle specification.

3.Inspect the possible cause and inspection item of the applicable malfunctioning part.

DTC Output Pattern And Malfunctioning Location

Cross (×): Communication error-related DTC

M-MDS display	DTC	DTC output pattern and malfunctioning location
DTC output module	DTC	DTC output pattern and malfunctioning location
PCM	U0101:00		×
	U0121:00				×
	U0131:00									×
	U0140:00
	U0151:00						×
	U0155:00
	U0164:00
	U2121:00
	U212E:00
	U2131:00
	U2133:00
DSC HU/CM	U0100:00	×		×
	U0101:00		×	×
	U0131:00									×
	U0140:00
	U0151:00						×
	U0155:00
	U0164:00
	U2121:00
	U212E:00
	U2131:00
EPS control module	U0100:00	×		×		×		×
	U0121:00				×	×		×
	U0140:00										×
	U2121:00
Vehicle control module (VCM)	U0100:00	×		×		×		×			×
	U0101:00		×	×		×		×			×
	U0121:00				×	×		×			×
	U0126:00
	U0131:00									×	×
	U0140:00
	U0151:00						×	×			×
	U0155:00
	U0156:00
	U0164:00
	U2120:00
	U2122:00
	U2123:00
	U2125:00
	U2126:00
	U212E:00
	U2131:00
	U2132:00
	U2133:00
	U2139:00
	U213A:00
Body control module (BCM)	U0100:00	×		×		×		×			×
	U0101:00		×	×		×		×			×
	U0115:00	×		×		×		×			×
	U0121:00				×	×		×			×
	U0121:87				×	×		×			×
	U0126:00
	U0131:00									×	×
	U0151:00						×	×			×
	U0155:00
	U0156:00
	U0158:00
	U0164:00
	U0182:00								×		×
	U2121:49
	U212A:00
	U212C:00
	U212D:00
	U212E:00
	U2131:00
	U2133:00
	U213A:00
	U213B:00
	U213C:00				×	×		×			×
Connectivity master unit (CMU)	U0140:00
Telematics communication unit	U0140:00
	U0151:00						×				×
	U0164:00
	U213C:00				×	×					×
Adaptive front lighting system (AFS) control module	U0122:87				×	×		×
	U0126:87
	U212A:87
	U212B:87
	U212D:87
Dash-electrical supply unit	U0100:00	×		×		×		×			×
	U0101:00		×	×		×		×			×
	U0121:00				×	×		×			×
	U0151:00						×	×			×
	U212B:00
	U212E:00
	U2131:00
	U2133:00
	U213A:00
SAS control module	U0140:00
	U0155:00
	U0156:00
TCM	U0100:00	×
	U0121:00				×
	U0131:00									×
	U0140:00
	U0155:00
	U212C:00
M-MDS display module		Module displayed in red or blue
PCM		×		×		×		×			×
TCM			×	×		×		×			×
DSC HU/CM					×	×		×			×
SAS control module							×	×			×
AFS control module / auto leveling control module									×		×
EPS control module										×	×
Diagnostic result
Possible cause and inspection item		A	B	C	D	E	F	G	H	I	J

ATX

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• PCM power supply voltage or body ground malfunction

• Open circuit in wiring harness between PCM and connector C-01

• Open circuit in wiring harness between connector C-01 and connector C-38

• Connector C-01 malfunction

• Connector C-38 malfunction

• PCM malfunction

System wiring diagram

am3zzw00027584

Inspection item

• PCM power supply voltage-related wiring harness and fuse

• PCM body ground related wiring harness

• PCM connector

• Connector C-01

• Connector C-38

• Wiring harness between PCM terminal 2S and connector C-01

• Wiring harness between PCM terminal 2T and connector C-01

• Wiring harness between connector C-01 and connector C-38

• PCM

MTX (with connectors C-37, C-36)

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• PCM power supply voltage or body ground malfunction

• Open circuit in wiring harness between PCM and connector C-01

• Open circuit in wiring harness between connector C-01 and connector C-02

• Open circuit in wiring harness between connector C-02 and connectors C-37, C-36

• Connector C-01 malfunction

• Connector C-02 malfunction

• Connectors C-37, C-36 malfunction

• PCM malfunction

System wiring diagram

am3zzw00027585

Inspection item

• PCM power supply voltage-related wiring harness and fuse

• PCM body ground related wiring harness

• PCM connector

• Connector C-01

• Connector C-02

• Connectors C-37, C-36

• Wiring harness between PCM terminal 2S and connector C-01

• Wiring harness between PCM terminal 2T and connector C-01

• Wiring harness between connector C-01 and connector C-02

• Wiring harness between connector C-02 and connectors C-37, C-36

• PCM

MTX (without connectors C-37, C-36)

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• PCM power supply voltage or body ground malfunction

• Open circuit in wiring harness between PCM and connector C-01

• Open circuit in wiring harness between connector C-01 and connector C-02

• Open circuit in wiring harness between connector C-02 and branch A

• Connector C-01 malfunction

• Connector C-02 malfunction

• PCM malfunction

System wiring diagram

am3zzw00027586

Inspection item

• PCM power supply voltage-related wiring harness and fuse

• PCM body ground related wiring harness

• PCM connector

• Connector C-01

• Connector C-02

• Wiring harness between PCM terminal 2S and connector C-01

• Wiring harness between PCM terminal 2T and connector C-01

• Wiring harness between connector C-01 and connector C-02

• Wiring harness between connector C-02 and branch A

• PCM

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• TCM power supply voltage or body ground malfunction

• Open circuit in wiring harness between TCM and connector C-38

• Connector C-38 malfunction

• TCM malfunction

System wiring diagram

am3zzw00027587

Inspection item

• TCM power supply voltage-related wiring harness and fuse

• TCM body ground related wiring harness

• TCM connector

• Connector C-38

• Wiring harness between TCM terminal E and connector C-38

• Wiring harness between TCM terminal F and connector C-38

• TCM

With connectors C-37, C-36

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• Open circuit in wiring harness between connector C-38 and connector C-02

• Open circuit in wiring harness between connector C-02 and connectors C-37,C-36

• Connector C-38 malfunction

• Connector C-02 malfunction

• Connectors C-37, C-36 malfunction

System wiring diagram

am3zzw00027588

Inspection item

• Wiring harness between connector C-38 and connector C-02

• Wiring harness between connector C-02 and connectors C-37, C-36

• Connector C-38

• Connector C-02

• Connectors C-37, C-36

without connectors C-37, C-36

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• Open circuit in wiring harness between connector C-38 and connector C-02

• Open circuit in wiring harness between connector C-02 and branch A

• Connector C-38 malfunction

• Connector C-02 malfunction

System wiring diagram

am3zzw00027589

Inspection item

• Wiring harness between connector C-38 and connector C-02

• Wiring harness between connector C-02 and branch A

• Connector C-38

• Connector C-02

With connectors C-37, C-36

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• DSC HU/CM power supply voltage or body ground malfunction

• Open circuit in wiring harness between DSC HU/CM and connectors C-37, C-36

• Connectors C-37, C-36 malfunction

• DSC HU/CM malfunction

System wiring diagram

am3zzw00027590

Inspection item

• DSC HU/CM power supply voltage-related wiring harness and fuse

• DSC HU/CM body ground related wiring harness

• DSC HU/CM connector

• Connectors C-37, C-36

• Wiring harness between DSC HU/CM terminal L and connectors C-37, C-36

• Wiring harness between DSC HU/CM terminal J and connectors C-37, C-36

• DSC HU/CM

Without connectors C-37, C-36

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• DSC HU/CM power supply voltage or body ground malfunction

• Open circuit in wiring harness between DSC HU/CM and branch A

• DSC HU/CM malfunction

System wiring diagram

am3zzw00027591

Inspection item

• DSC HU/CM power supply voltage-related wiring harness and fuse

• DSC HU/CM body ground related wiring harness

• DSC HU/CM connector

• Wiring harness between DSC HU/CM terminal L and branch A

• Wiring harness between DSC HU/CM terminal J and branch A

• DSC HU/CM

With connectors C-37, C-36

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• Open circuit in wiring harness between connectors C-55, C-56 and connector C-21

• Open circuit in wiring harness between connector C-21 and connector C-07

• Open circuit in wiring harness between connector C-07 and connectors C-37, C-36

• Connectors C-55, C-56 malfunction

• Connector C-21 malfunction

• Connector C-07 malfunction

• Connectors C-37, C-36 malfunction

System wiring diagram

am3zzw00027592

Inspection item

• Wiring harness between connectors C-55, C-56 and connector C-21

• Wiring harness between connector C-21 and connector C-07

• Wiring harness between connector C-07 and connectors C-37, C-36

• Connectors C-55, C-56

• Connector C-07

• Connector C-21

• Connectors C-37, C-36

Without connectors C-37, C-36

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• Open circuit in wiring harness between connectors C-55, C-56 and connector C-21

• Open circuit in wiring harness between connector C-21 and connector C-07

• Open circuit in wiring harness between connector C-07 and branch A

• Connectors C-55, C-56 malfunction

• Connector C-21 malfunction

• Connector C-07 malfunction

System wiring diagram

am3zzw00027593

Inspection item

• Wiring harness between connectors C-55, C-56 and connector C-21

• Wiring harness between connector C-21 and connector C-07

• Wiring harness between connector C-21 and branch A

• Connectors C-55, C-56

• Connector C-07

• Connector C-21

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• SAS control module power supply voltage or body ground malfunction

• Open circuit in wiring harness between SAS control module and connectors C-55, C-56

• Connectors C-55, C-56 malfunction

• SAS control module malfunction

System wiring diagram

am3zzw00027594

Inspection item

• SAS control module power supply voltage-related wiring harness and fuse

• SAS control module body ground related wiring harness

• SAS control module connector

• Connectors C-55, C-56

• Wiring harness between SAS control module terminal 3A and connectors C-55, C-56

• Wiring harness between SAS control module terminal 3D and connectors C-55, C-56

• SAS control module

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• Open circuit in wiring harness between connector C-40 and connector C-13

• Open circuit in wiring harness between connector C-13 and connector C-21

• Open circuit in wiring harness between connector C-21 and connectors C-55, C-56

• Connector C-40 malfunction

• Connector C-13 malfunction

• Connector C-21 malfunction

• Connectors C-55, C-56 malfunction

System wiring diagram

am3zzw00027595

Inspection item

• Connector C-40

• Connector C-13

• Connector C-21

• Connectors C-55,C-56

• Wiring harness between connector C-40 and connector C-13

• Wiring harness between connector C-13 and connector C-21

• Wiring harness between connector C-21 and connectors C-55,C-56

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• AFS control module / auto leveling control module power supply voltage or body ground malfunction

• Open circuit in wiring harness between AFS control module / auto leveling control module and connector C-40

• Connector C-40 malfunction

• AFS control module / auto leveling control module malfunction

System wiring diagram

am3zzw00027596

Inspection item

• AFS control module / auto leveling control module power supply voltage-related wiring harness and fuse

• AFS control module / auto leveling control module body ground related wiring harness

• AFS control module / auto leveling control module connector

• Connector C-40

• Wiring harness between AFS control module / auto leveling control module terminal I and connector C-40

• Wiring harness between AFS control module / auto leveling control module terminal J and connector C-40

• AFS control module / auto leveling control module

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• EPS control module power supply voltage or body ground malfunction

• Open circuit in wiring harness between EPS control module and connector C-40

• Connector C-40 malfunction

• EPS control module malfunction

System wiring diagram

am3zzw00027597

Inspection item

• EPS control module power supply voltage-related wiring harness and fuse

• EPS control module body ground related wiring harness

• EPS control module connector

• Connector C-40

• Wiring harness between EPS control module terminal 2C and connector C-40

• Wiring harness between EPS control module terminal 2A and connector C-40

• EPS control module

Possible cause

• Connector terminal disconnection, poor contact, damage, deformation, corrosion

• Body control module (BCM) power supply voltage or body ground malfunction

• Open circuit in wiring harness between body control module (BCM) and connector C-40

• Connector C-40 malfunction

• Body control module (BCM) malfunction

System wiring diagram

am3zzw00027598

Inspection item

• Body control module (BCM) power supply voltage-related wiring harness and fuse

• Body control module (BCM) body ground related wiring harness

• Body control module (BCM) connector

• Connector C-40

• Wiring harness between body control module (BCM) terminal 3X and connector C-40

• Wiring harness between body control module (BCM) terminal 3W and connector C-40

• Body control module (BCM)

2019 BP Shop Manual

BP Shop Manual

DETERMINING OPEN CIRCUIT LOCATION (CAN-BUS No.1) [(US)]

DETERMINING OPEN CIRCUIT LOCATION (CAN-BUS No.1) [(US)]