| 1. |
Remove the air duct and air cleaner
assembly.
(Refer to Intake and Exhaust System - "Air
Cleaner") |
| 2. |
Remove the intercooler outlet
hose(A).
Tightening
torque :
4.9 ~ 6.8N.m (0.5 ~ 0.7 kgf.m, 3.6 ~ 5.0
lb-ft)
|
|
| 3. |
Remove the intercooler inlet hose &
pipe(A).
Tightening
torque
Bolt :
19.6 ~ 26.4N.m (2.0 ~ 2.7 kgf.m, 14.4 ~
19.5 lb-ft)
Clamp :
4.9 ~ 6.8N.m (0.5 ~ 0.7 kgf.m, 3.6 ~ 5.0
lb-ft)
|
|
| 4. |
Install in the reverse order of removal.
| •
|
Match the marking part of hose and
marking part of throttle body, compressor
. |
| •
|
Match the pipe stopper and hose
marking. |
| •
|
When the band part have been place
on the top of position mark of hose, install to not
exceed the mark. |
| •
|
Tighten until the torque control
cap is released. If there is no the torque control cap,
tighten as specified
torque. | | | |
