| 1. |
Disconnect the battery negative cable, and
wait for at least three minutes before beginning
work. |
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Front
seat") |
| 3. |
After loosening the mounting screws, and then
remove the front seat track side cover (A).
|
| 4. |
Loosen the seat belt buckle mounting bolt and
remove the seat belt buckle switch (A).
|
|
Be sure to install the harness wires so they
will not pinch or interfere with other parts.
|
| 1. |
Remove the ignition key from the
vehicle. |
| 2. |
Disconnect the battery negative cable, and
wait for at least three minutes before beginning
work. |
| 3. |
Install the seat belt buckle
switch.
Tightening
torque:
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9
~39.8 lb-ft)
| |
| 4. |
Install the front seat track side
cover. |
| 5. |
Install the front seat assembly.
(Refer to the Body group - "Front
seat") |
| 6. |
Reconnect the battery negative
cable. |
| 7. |
After installing the seat belt buckle switch,
confirm proper system operation:
| A. |
Turn the ignition switch ON; the SRS
indicator should be turned on for about six seconds and then
go
off. | | |
