Menu +
Generic selectors
Exact matches only
Search in title
Search in content

STEERING ANGLE SENSOR INSPECTION

< Previous Next >

2016 – MX-5 – Body and Accessories

STEERING ANGLE SENSOR INSPECTION

NOTE:

1. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION.)

2. Connect the plus (+) end of a tester to steering angle sensor terminal A and the minus (-) end of the tester to terminal B (ground).

3. Switch the ignition ON (engine off or on).

4. Turn the steering wheel to the right and left.

5. Verify that the voltage between steering angle sensor terminals A and B (ground) is as indicated in the table.

6. Switch the ignition off.

7. Connect the plus (+) end of a tester to steering angle sensor terminal C and the minus (-) end of the tester to terminal B (ground).

8. Switch the ignition ON (engine off or on).

9. Turn the steering wheel to the right and left.

10. Verify that the voltage between steering angle sensor terminals C and B (ground) is as indicated in the table.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.